Home Social Network AnoizesAnoizes deviantARTdeviantART speed guideSpeedGuide.net hackHack Forums rssSubscribe

Tips Untuk Celcom Broadband Huawei E220 USB Modem 3G/HSDPA/GPRS/EDGE

Author: napsters // Category:


Celcom Broadband Huawei E220 USB Modem 3G/HSDPA/GPRS/EDGE





Hello semua (Hye all)

Mesti ada sesetengah korang yang tidak puas hati ngan kelajuan Celcom Broadband Huawei E220 USB Modem 3G/HSDPA/GPRS/EDGE nie. Jadi kat bawah nie ader tips untuk korang.

1. Aku pakai Huawei E220 USB Modem 3G/HSDPA/GPRS/EDGE Celcom Broadband nie so far aku raser macam berbaloi gak.

2. Speed aku, aku raser ok gak dari pakai streamyz,
Nie speed terbaru aku>>





Notes: Keep in mind in data communication 1 kilobit = 1000 bits, while in data storage 1 Kilobyte = 1024 Bytes.



3. Aku purcase Huawei E220 USB Modem 3G/HSDPA/GPRS/EDGE Celcom Broadband nie guner package Business Plan aka Advanced Plan up to 7.2Mbps. Starting dalam RM300.00 and bulan-bulan fix RM120.00.

4. First aku beli, terus jer aku update firmware version dia jadi 11.117.10.00.00 pastue update dashboard software HOST11.107.05.00.03.B266 Mobile Connect. p/s* korang leh type kat google kalau nak cari intaller dia, aku da luper dia nyer links.

5. Korang leh tweaks skit korangnyer broadband kat web site nie>>http://forums.speedguide.net.

6. Kalau korang x faham korang leh tengok threads yang da aku post kat forum tue dan guner setting yg telah ditetapkan dalam tue. Nie thread yang telah aku post skali ngan setting>>http://forums.speedguide.net/showthread.php?t=243801&page=2.


7. If you have a anything problem about Celcom Broadband Huawei E220 USB Modem 3G/HSDPA/GPRS/EDGE just ask and comment here


285 Responses to "Tips Untuk Celcom Broadband Huawei E220 USB Modem 3G/HSDPA/GPRS/EDGE"

«Oldest   ‹Older   1 – 200 of 285   Newer›   Newest»
Anonymous Says :
October 22, 2008 at 9:36 PM

klu pkai yg bulan2 rm68 bleh ke tweak cam ko?

napsters Says :
October 22, 2008 at 10:20 PM

hmm...aku raser x leh kot coz these setting da fix ngan kelajuan untuk advanced package...jadi kalau ko nak setting baru dan sesuai dengan kelajuan yang ISP bagi just post TCP Analyzer....ko bukak page nie >> http://www.speedguide.net/analyzer.php pastue copy TCP Analyzer Results dan paste kat sinie then aku bleh tolong calculate proper setting untuk ko...

Anyway answer the question below before do tweaking >>

1. What type of connection do you have? i.e. 56K, ISDN, DSL (PPPoE or not), Cable etc.

2. Who is your ISP and what is your advertised speed from them? i.e. Cox.net & 3000/256 - this is advertised in kilobits per second.

3. What are your current settings now? Do a TCP/IP Analyzer Test and copy and paste the results (remember to XXXXX out your IP address) here.

4. Please tell me your operating system i.e. 95, 98, 98SE, ME, 2K or XP.

Anonymous Says :
October 23, 2008 at 9:00 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 10.23.2008 08:58
IP address: 219.93.xxx.xx

TCP options string: 020405b40103030201010402
MSS: 1460
MTU: 1500
TCP Window: 256960 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64240
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 10278kbps (1285KBytes/s)
BDP limit (500ms): 4111kbps (514KBytes/s)
MTU Discovery: ON
TTL: 35
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

Nie result TCP Analyzer minta tunjuk ajar...aku pakai celcom D98 3.6 MBps tapi tak cecah pun...

napsters Says :
October 23, 2008 at 10:45 PM

1. The TCP Settings are correct.

Post your speed at several servers near by.

2. What OS do you use?

3. Skang ko kat area maner? So ko kene check area ko dapat coverage aper. Pergi kat sini >> http://www.celcom.com.my/cep/xresources/CelcomCORP/broadband/html/more_on_broadband.html dan lepas load web page ko click Coverage Map kat sebelah kanan then masukkan namer area ko.

4. Tweaks for firefox >>
http://amenapster.blogspot.com/2008/09/make-firefox-browser-run-at-full-speed.html
Pastue install firefox add-on iaitu fasterfox.

5. Gpedit tips >>
http://amenapster.blogspot.com/2008/09/how-to-speed-up-your-broadband-internet.html

6. Pakai Ccleaner untuk clean pc ko. Cari kat http://www.filehippo.com/

7. Pastikan pc clean 100% dari virus.

Anonymous Says :
October 25, 2008 at 3:34 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 10.25.2008 03:26
IP address: 219.93.xxx.xxx

TCP options string: 020405b40103030201010402
MSS: 1460
MTU: 1500
TCP Window: 17520 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 4380
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 701kbps (88KBytes/s)
BDP limit (500ms): 280kbps (35KBytes/s)
MTU Discovery: ON
TTL: 111
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

Vista SP1
Area : Tawau (Town)

napsters Says :
October 26, 2008 at 12:03 AM

Hello...sorry to say about this that "TCP Optimizer does not work with Vista", however there may be some tips to speed your internet connection on Vista.

see Philip's article on Windows Vista Tweaks:
http://www.speedguide.net/read_articles.php?id=2574

Run Analyzer and speed test and post the results.

Open command prompt and run netsh int tcp show global and copy/post results.



This is what I get, yours should be similar.
C:\Users\nApStEr>netsh int tcp show global
Querying active state...

TCP Global Parameters
----------------------------------------------
Receive-Side Scaling State : enabled
Chimney Offload State : disabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : ctcp ( may be none)
ECN Capability : disabled
RFC 1323 Timestamps : disabled

Imran Aziz aka Willie Says :
October 27, 2008 at 5:22 PM

From your tips, here is the result:

C:\>netsh interface tcp show global
Querying active state

TCP Global Parameters
___________________________________
Receive-Side Scaling State:enable
Chimney Offload State:disable
Receive Window Auto-Tuning Level:highlyrestricted
Add-On Congestion Control Provider:none
ECN Capability:disable
RFC 1323 Timestamps:disable

Take me few hours to understand this but only understand a lil of it >_<

napsters Says :
October 29, 2008 at 4:59 PM

So willie hows about your speed...? Its work? Let me know

Anonymous Says :
October 31, 2008 at 1:02 AM

dude..mane nak cr yang latest software tue??

napsters Says :
October 31, 2008 at 12:17 PM

latest software?...You mean dashboard software?
Ok here for the latest dashboard software for Huawei E220>>
http://www.huawei.com/mobileweb/en/doc/list.do?type=-1&id=736

Anonymous Says :
October 31, 2008 at 2:09 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 10.31.2008 01:58
IP address: 219.93.xxx.xx

TCP options string: 020401f00103030201010402
MSS: 496
MTU: 536
TCP Window: 16616 (NOT multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 4154
Recommended RWINs: 65472, 130944, 261888, 523776, 1047552
BDP limit (200ms): 665kbps (83KBytes/s)
BDP limit (500ms): 266kbps (33KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

Vista Ultimate SP1
Area: USM Transkrian

is it any problem with my broadband??doing some download from rapidshare it speed is worst compared to my roomate,need help here

napsters Says :
October 31, 2008 at 7:51 PM

Anyway please answer the question below before do tweaking >>

1. What type of connection do you have? i.e. 56K, ISDN, DSL (PPPoE or not), Cable etc.

2. Who is your ISP and what is your advertised speed from them? i.e. Cox.net & 3000/256 - this is advertised in kilobits per second.

3. What are your current settings now? Do a TCP/IP Analyzer Test and copy and paste the results (remember to XXXXX out your IP address) here.

4. Please tell me your operating system i.e. 95, 98, 98SE, ME, 2K or XP.

napsters Says :
October 31, 2008 at 7:56 PM

sorry to say about this that "TCP Optimizer does not work with Vista", however there may be some tips to speed your internet connection on Vista.

see Philip's article on Windows Vista Tweaks:
http://www.speedguide.net/read_articles.php?id=2574

Run Analyzer and speed test and post the results.

Open command prompt and run netsh int tcp show global and copy/post results.



This is what I get, yours should be similar.
C:\Users\nApStEr>netsh int tcp show global
Querying active state...

TCP Global Parameters
----------------------------------------------
Receive-Side Scaling State : enabled
Chimney Offload State : disabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : ctcp ( may be none)
ECN Capability : disabled
RFC 1323 Timestamps : disabled

Anonymous Says :
October 31, 2008 at 10:34 PM

hello..i'm using vista and i follow all the tweak from the page u given but how about the manual tuning registry parameters??is it a must coz i afraid to do so because i'm afraid is my OS is unstable

napsters Says :
November 1, 2008 at 1:10 AM

I not recommended you change regedit with manual tuning registry parameters because it will crash your regedit and give a blue screen(just in case on vista).
1. Just do a TCP Global Parameters tips
2. Tweaks for firefox >>
http://amenapster.blogspot.com/2008/09/make-firefox-browser-run-at-full-speed.html also use fasterfox.
3. Gpedit tips >>
http://amenapster.blogspot.com/2008/09/how-to-speed-up-your-broadband-internet.html
4. Use a Ccleaner to clean your pc >> http://www.filehippo.com/ (Browse for Ccleaner then download)
5. High recomended clean your pc from any virus, spyware, adware and etc.

Anonymous Says :
November 4, 2008 at 1:46 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.04.2008 00:43
IP address: 219.93.xxx.xx

TCP options string: 0204057801010402
MSS: 1400
MTU: 1440
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

windows xp SP3
penang
D98 package (celcom broadband)
is there any problem with my broadband??
i can't get my maximum download speed when download from premium rapidshare account

Anonymous Says :
November 4, 2008 at 7:53 PM

Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1440
TTL - 64
TCP Receive Window - 257600
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.

Anonymous Says :
November 4, 2008 at 10:13 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.04.2008 09:08
IP address: 219.93.xxx.xx

TCP options string: 020405780103030201010402
MSS: 1400
MTU: 1440
TCP Window: 257600 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64400
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 10304kbps (1288KBytes/s)
BDP limit (500ms): 4122kbps (515KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

here my latest TCP Analyzer report,i'm the one who posted it in 3 Nov,so how was it?

Anonymous Says :
November 4, 2008 at 10:13 PM

Seems we both have a same MTU and stay in Penang. So just try the following above with TCP Optimizer. It totally works for me and obviously should work for you. Post a new TCP Analyzer report after reboot.Thanks

Anonymous Says :
November 4, 2008 at 10:29 PM

Before that what the broadband package did you use...advanced or else? I need to know how much speed from ISP advertised for you...ok here we go...do a speedtest at nearest server..Here a link>>http://www.speedtest.net/

Anonymous Says :
November 6, 2008 at 10:06 PM

napster
winxp sp3
firefox 3

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.05.2008 01:57
IP address: 219.93.xxx.xx

TCP options string: 020405780103030101010402
MSS: 1400
MTU: 1440
TCP Window: 128000 (NOT multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64000
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 5120kbps (640KBytes/s)
BDP limit (500ms): 2048kbps (256KBytes/s)
MTU Discovery: ON
TTL: 47
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

so this my analyzer ... YOT

Anonymous Says :
November 7, 2008 at 12:32 AM

ok...yot
Ko download TCP Optimizer then
try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1440
TTL - 64
TCP Receive Window - 257600
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.
ps* setting ko pun samer gak cam aku...cuma aku nak tahu ko amik broadband package yang maner..advanced or else?...Setting nie memang sesuai untuk yang pakai broadband cam kiter...Nak calculate nie pun kene tahu gak ip analyze ko then pas aku kira-kira analyze ko, aku da dapat proper setting untuk ko kat atas tue. Sekarang nie lepas ko set kat TCP Optimizer, reboot pc pastue analyze balik then post balik kat sini.

Anonymous Says :
November 7, 2008 at 6:14 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.07.2008 05:11
IP address: 219.93.xxx.xx

TCP options string: 020405780103030001010402
MSS: 1400
MTU: 1440
TCP Window: 49368 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 49368
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 1975kbps (247KBytes/s)
BDP limit (500ms): 790kbps (99KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

napster lepas aku buat tcp optimizer
pakej d68 jekkk... YOT

Anonymous Says :
November 7, 2008 at 8:19 PM

TCP window tak berubah...set balik pastue restart then post new anaylize...

Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1440
TTL - 64
TCP Receive Window - 257600
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.

Anonymous Says :
November 8, 2008 at 6:53 PM

analyzer terbaru ...

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.08.2008 05:48
IP address: 219.93.xxx.xx

TCP options string: 020405780103030001010402
MSS: 1400
MTU: 1440
TCP Window: 49368 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 49368
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 1975kbps (247KBytes/s)
BDP limit (500ms): 790kbps (99KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

yot...

Anonymous Says :
November 8, 2008 at 9:19 PM

Rerun the settings I gave. When correctly done, TCP Window should become 257600.

Anonymous Says :
November 9, 2008 at 7:53 AM

latest analyzer ..
setelah reseting ikut seting tuh ...


« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.08.2008 18:50
IP address: 219.93.xxx.xx

TCP options string: 020405780103030201010402
MSS: 1400
MTU: 1440
TCP Window: 257600 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64400
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 10304kbps (1288KBytes/s)
BDP limit (500ms): 4122kbps (515KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

yot..

Anonymous Says :
November 9, 2008 at 7:58 AM

[URL=http://www.speedtest.net][IMG]http://www.speedtest.net/result/352694877.png[/IMG][/URL]

Anonymous Says :
November 9, 2008 at 8:00 AM

Ok...Nampaknya setting da ok then sekarang ko cuber running speed test kat sini pastue pilih server yang terdekat dengan tempat ko>>
http://www.speedtest.net/

Anonymous Says :
November 9, 2008 at 8:00 AM

http://www.speedtest.net/result/352696032.png

result speedtest

yot..

Anonymous Says :
November 9, 2008 at 8:06 AM

Emm..Yot, monthly charged did you paid beraper?

Anonymous Says :
November 9, 2008 at 9:20 AM

rm 68 sebulan

Anonymous Says :
November 9, 2008 at 9:37 AM

How lucky are you...D68 package monthly charged is RM68 and speed for D68 package is capped at 384kbps. So you got 95% or plus from 100% speed that ISP give you. Keep these setting. So for the final do a proper tips below>>

1. Tweaks for firefox >>
http://amenapster.blogspot.com/2008/09/make-firefox-browser-run-at-full-speed.html also use fasterfox.

2. Gpedit tips >>
http://amenapster.blogspot.com/2008/09/how-to-speed-up-your-broadband-internet.html

3. Use a Ccleaner to clean your pc >> http://www.filehippo.com/ (Browse for Ccleaner then download)

Anonymous Says :
November 9, 2008 at 10:23 AM

firefox 3.0.4 boleh tweak tak ..

yot..

napsters Says :
November 9, 2008 at 11:03 AM

ehmm...boleh..
1. wat tweaks for firefox>>
http://amenapster.blogspot.com/2008/09/make-firefox-browser-run-at-full-speed.html

2. guner fasterfox untuk firefox version 3>>
http://www.ablogwithadifference.com/2008/09/how-to-run-faster-fox-in-firefox-3-and.htm

Anonymous Says :
November 9, 2008 at 3:48 PM

ok dah install fasterfox

Anonymous Says :
November 9, 2008 at 3:54 PM

perlu ker buat step no 1 . tweak firefox tuh kalau dah install fasterfox


yot..

Anonymous Says :
November 9, 2008 at 10:31 PM

extremely important.

Anonymous Says :
November 11, 2008 at 6:30 AM

hi napster..

thanx for the great tips..i did all the steps you proposed...my initial d/load speed is 100 kb/s before tweaking...but after tweaking this is the result..

http://www.speedtest.net/result/353071651.png

my package is celcom d98 and I stay in pasir gudang...now my only problem is my d/load speed for bitcomet 1.04 is limited cause the listening port is blocked..i used Kaspersky Internet Security 2009 and the following is my setting...

1) I set the listening port to 8080 & unchecked "enable uPNP port mapping" in the options menu of bitcomet..

2) I disabled port monitoring by kaspersky Internet security 2009 by selecting "settings"-> "network" (under "options")-> "select" button (under "monitored ports")-> unchecked port "8080"..

but still my listening port is blocked....can you point out what I did wrong?...really appreciate it..

antu...

Anonymous Says :
November 11, 2008 at 5:20 PM

Hello antu, good to hear that your speed has been increased...When using a bitcomet your port listening is block by ISP and got a yellow color...this happen when you use a broadband because broadband have a sharing ip address and cannot be open-forward that port ps*its mobile service and not have a router instead. And the solution is, setting bitcomet to limit.
1. Open BitComet 1.04, go to connection, global max upload rate set to 10.
2. Listen port, set to 60000 until 65528, you can choose.
3. On Port mapping uncheck all
4. Go to Advanced, click bittorent.max_connection _per_task set to 80, click network.max_connections set to 134
5. TCP IP limit set to 200. If you use win xp 2 use a third party to open up your TCP Limit. Try google this EvID4226Patch.exe and download.
6. Reboot your pc.
7. Now...after you set a limit on bitcomet you suppost get about 100kbps or plus download rate.
Then ignore the yellow thingy on bitcomet.

Anonymous Says :
November 11, 2008 at 11:05 PM

Owh..one thing i forgot about this...very important...before you download file torrent from torrent site, always remember, make sure that torrent file must have 200 or plus seeder and a little leecher...ok..have fun downloading..

Anonymous Says :
November 15, 2008 at 8:06 AM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.14.2008 19:04
IP address: 219.93.xxx.xx

TCP options string: 020405780103030201010402
MSS: 1400
MTU: 1440
TCP Window: 256960 (NOT multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64240
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 10278kbps (1285KBytes/s)
BDP limit (500ms): 4111kbps (514KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)
tolong calculate aku nye plak bro =) aku gune pack 98 area nilai n9

Anonymous Says :
November 15, 2008 at 11:53 AM

TCP options string: 020405b40402080a03e127b20000000001030300
MSS: 1460
MTU: 1500
TCP Window: 5840 (multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 5840
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 234kbps (29KBytes/s)
BDP limit (500ms): 93kbps (12KBytes/s)
MTU Discovery: ON
TTL: 46
Timestamps: ON
SACKs: ON
IP ToS: 00000000 (0)

help optimize mine

Anonymous Says :
November 17, 2008 at 4:57 PM

for amuk9x and pharmacist, what OS did you use and How much speed that ISP advertised for you (for example mine have a Celcom Advanced Package Up to 7.2 Mbps and you?)

Anonymous Says :
November 17, 2008 at 7:47 PM

saya guna windows xp
celcom broadband pakerj d98
tapi sekarang hanya dapat coverage umts

Anonymous Says :
November 17, 2008 at 8:37 PM

For pharmacist try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1440
TTL - 64
TCP Receive Window - 64400
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.

Anonymous Says :
November 17, 2008 at 8:44 PM

For amuk9x try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1440
TTL - 64
TCP Receive Window - 257600
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.

Anonymous Says :
November 18, 2008 at 2:29 AM

naps bro. ni nak tanye. kenape lepas reboot , bile cek balik analyzer ni akan jadi ke default TCP Window: 128480 , dier tak jadi - 257600, dah setting baru pon . bile reboot cek analyzer tetap jadi - 128480

Anonymous Says :
November 18, 2008 at 2:34 AM

bro. sya gune xp xp3 ,package d98. kat sini full bar hsdpa dan dah upgrade ke 7.2 mb
« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.17.2008 13:27
IP address: 219.93.xxx.xx

TCP options string: 020405b4010303010101080a000000000000000001010402
MSS: 1460
MTU: 1500
TCP Window: 128480 (multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64240
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 5139kbps (642KBytes/s)
BDP limit (500ms): 2056kbps (257KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: ON
SACKs: ON
IP ToS: 00000000 (0)


kenapa dier jadi TCP Window: 128480
walau pon dah seting 257600. dah reboot banyak kali, tetap sama

Anonymous Says :
November 18, 2008 at 12:28 PM

salam naps ni yg ko mintak

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.13.2008 08:17
IP address: 219.93.xxx.xx
TCP options string: 020405b401010402
MSS: 1460
MTU: 1500
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 47
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

windows xp sp2
celcom D68 blue cube hsdpa 7.2mbps

torrent da dpt average 40k da tp tu pn kalu internet ok.. yg peliknye ade line tp xde internet huhuhu.... tracert lagi sedih..

tlg eh bro salam..

-hazeem-

Anonymous Says :
November 18, 2008 at 1:59 PM

Seems you(amuk9x, hazeem, pharmacist)have a same IP, that means have a same MTU, try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1500
TTL - 64
TCP Receive Window - 256960
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.
*Rerun the settings I gave. When correctly done, TCP Window should become 256960.
*For pharmacist you have a MTU = 1500 and trogers never know it so use this setting.

Anonymous Says :
November 18, 2008 at 2:06 PM

Hello amuk9x, i found this…even my broadband have trouble 2,3 hari yg lepas in penang
>>dapat connect tapi tak dapat browse web…call celcom and dorang cakap ada failure kat seluruh malaysia…

Anonymous Says :
November 18, 2008 at 2:07 PM

Then i’m back to hometown (Ipoh) and seems ok. Maybe celcom ngah upgrade or maintainence their line secara berperingkat-peringkat.

Anonymous Says :
November 18, 2008 at 2:14 PM

weh...ko kene hide ip ko coz bahayer klu ko tunjuk no ip ko kat public...nie boleh menyebabkan hackers ambik kesempatan ceroboh pc ko...Contoh, nie no ip aku >> 219.93.xxx.xx

Anonymous Says :
November 18, 2008 at 2:19 PM

3 4 hari ni celcom cam hampeh. ip server yg hidup pon satu jek 219.93.xxx.xx. ni jek ip yg dapat setiap kali connect. hehe

Anonymous Says :
November 18, 2008 at 6:54 PM

samalah kita napster, aku kat usm penang ni, sabtu ahad boleh connect tapi tak boleh access sbrg laman web... dpt 'sent' tp x dpt 'received'... tak lama tu aku baca kat lowyat.net baru tahu mmg ramai kena, igt pasal optimizer tu...
setting yg MTU 1500 aku post kat speedguide tu masa aku guna wireless usm, sama ke kalau guna 3g celcom?
kdg2 aku setting ikut cara lain nnt dia tak detect sebarang coverage, aku rasa sbb dia setting utk hsdpa only, sbb aku tgk huawei aku klua kaler ijau2 je, pastu aku setting balik yg skrg ni, baru dpt balik coverage...
kat tempat aku xde coverage hsdpa, ada umts je :(

Anonymous Says :
November 18, 2008 at 9:54 PM

owh...guner wireless rupanyer...setiap device mempunyai berlainan setting. Kalau ko pakai Huaweinyer connection just use the one...disabled semua hardware connection yg ko x pakai..*takut nanti huawei tue conflict dengan device lain...guner setting yg aku bagi untuk MTU 1500 for huawei connection..untuk wireless plak MTU 1440, guner setting yg trogers bagi...ko hanya boleh pilih salah satu connection yg ko nak pakai...x leh pilih kedua2nyer...so kene decide arr maner satu nak pakai...

Anonymous Says :
November 19, 2008 at 1:02 PM

naps aku salu gak ade masalah dpt connect tp xdpt nak browse kire xde line.. tp connected.. kat kat recieved icon xnyala tp kat sent icon kdg2 nyala... time leh pkai mmg puas ati la sng nak torrent sng nak browse, streaming pun ok... tp time putus mmg xbest lngsung.. sama la kita phramacist, dpt utms je kat sini.. sdh jer kalu ade hsdpa leh la jgk nak upgrade plan D98 baru layan tambah 30 inggit je.. hehehe.. anyways napster thnx... salam

-Hazeem-

Anonymous Says :
November 19, 2008 at 11:29 PM

connect 3g bleh TAPI nak connect GPRS x bleh.apsal ha.biler try connect dia kuar "a connection to the remote computer could not be established,so the port used for this connection was closed.for further assistance,click more info or search help and support center for this error number"

Anonymous Says :
November 19, 2008 at 11:49 PM

Tested on: 11.19.2008 10:47
IP address: 219.93.xxx.xx

TCP options string: 0204020e0103030101010402
MSS: 526
MTU: 566
TCP Window: 128000 (NOT multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64000
Recommended RWINs: 65224, 130448, 260896, 521792, 1043584
BDP limit (200ms): 5120kbps (640KBytes/s)
BDP limit (500ms): 2048kbps (256KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

xp2,rm98 sebln,up to 7.2M...
-texas5-

Anonymous Says :
November 19, 2008 at 11:51 PM

dua msg yg atas aku yg antaq.tolong ekk napster...

-texas5-

Anonymous Says :
November 20, 2008 at 12:12 AM

1. it said “A connection to the remote computer could not be established, so the port used for this connection was closed.” thats mean your port is currently use by another application.
2. The solution is tryin to clean up your pc with Ccleaner, fix it and restart your pc.
3. Try connecting again and its connect. If not do a installation your driver and dashboard software again.
4. And you can try to disable all your connection except the connection you use…
5. Try put your APN, select static and write celcom3g
6. if you haven’t installed anything that might affect the settings/config of the modem and/or the connection, try the numbers *99# or *99***1# because I heard that the error connection closed (Error #619) is an APN issue… sometimes a simple restart or not-so-simple reboot can solve it. if none works, try the Celcom careline number. the last thing would be to see the doctor - send your modem to a technician.

*ps texas, what modem did you use?

Anonymous Says :
November 20, 2008 at 12:16 AM

same as u are...

-texas5-

Anonymous Says :
November 20, 2008 at 12:30 AM

From your TCP Analyze i assume that your MTU is very low number...jadi ko kene upgrade HUAWEI modem ko tue. Update dashboard software and upgrade firmware...

Anonymous Says :
November 20, 2008 at 1:24 AM

nak upgrade cmne???software ke???

-texas5-

Anonymous Says :
November 20, 2008 at 1:32 AM

caranyer gie kat sini,
http://tutorialku.web.id/2008/11/03/upgrade-huawei-e220/

Anonymous Says :
November 20, 2008 at 1:35 AM

aku dah upgrade.sebijik mcm yg ko buat.firmware upgrade ke 11.117.10.00.00 & dashboard software upgrade ke HOST11.107.05.00.03.B266 Mobile Connect...btoi kan???

-texas5-

Anonymous Says :
November 20, 2008 at 1:51 AM

cuber ko unplug, wait 10 seconds and plug in back then connect...wat TCP Analyze balik pastue paste kat sinie. Satu lagi download HijackThis, Install , Scan then paste log file kat sinie...

Anonymous Says :
November 20, 2008 at 2:06 AM

and also unplugged all port connection to avoid conflict except HUAWEI connection...

Anonymous Says :
November 20, 2008 at 2:13 AM

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 2:07:52, on 11/20/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\avp.exe
C:\Program Files\cFosSpeed\spd.exe
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\WINDOWS\system32\IoctlSvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\AGRSMMSG.exe
C:\PROGRA~1\LAUNCH~1\CPLFL32.EXE
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\cFosSpeed\cFosSpeed.exe
C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\avp.exe
C:\Program Files\Adobe\Acrobat 7.0\Distillr\Acrotray.exe
C:\Program Files\Internet Download Manager\IDMan.exe
C:\Program Files\Common Files\Nero\Lib\NMIndexStoreSvr.exe
C:\Program Files\Skype\Phone\Skype.exe
C:\Program Files\Adobe\Acrobat 7.0\Acrobat\acrobat_sl.exe
C:\Program Files\LimeWire\LimeWire.exe
C:\Program Files\Common Files\Nero\Lib\NMIndexingService.exe
C:\WINDOWS\system32\wscntfy.exe
C:\Program Files\Internet Download Manager\IEMonitor.exe
C:\Program Files\Skype\Plugin Manager\skypePM.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Huawei technologies\Mobile Connect\Mobile Connect.exe
C:\PROGRA~1\Mozilla Firefox\firefox.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\Program Files\Yahoo!\Companion\Installs\cpn\yt.dll
F2 - REG:system.ini: UserInit=userinit.exe,
O2 - BHO: IDMIEHlprObj Class - {0055C089-8582-441B-A0BF-17B458C2A3A8} - C:\Program Files\Internet Download Manager\IDMIECC.dll
O2 - BHO: Yahoo! Toolbar Helper - {02478D38-C3F9-4EFB-9B51-7695ECA05670} - C:\Program Files\Yahoo!\Companion\Installs\cpn\yt.dll
O2 - BHO: AcroIEHlprObj Class - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll
O2 - BHO: SSVHelper Class - {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - C:\Program Files\Java\jre1.6.0_03\bin\ssv.dll
O2 - BHO: AcroIEToolbarHelper Class - {AE7CD045-E861-484f-8273-0445EE161910} - C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll
O3 - Toolbar: Adobe PDF - {47833539-D0C5-4125-9FA8-0819E2EAAC93} - C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll
O3 - Toolbar: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\Program Files\Yahoo!\Companion\Installs\cpn\yt.dll
O4 - HKLM\..\Run: [SoundMan] SOUNDMAN.EXE
O4 - HKLM\..\Run: [AGRSMMSG] AGRSMMSG.exe
O4 - HKLM\..\Run: [ATIModeChange] Ati2mdxx.exe
O4 - HKLM\..\Run: [LManager] C:\PROGRA~1\LAUNCH~1\CPLFL32.EXE
O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe"
O4 - HKLM\..\Run: [AutoShutdown] C:\PROGRA~1\AUTOSH~1\AutoShutdown.exe
O4 - HKLM\..\Run: [HP Software Update] C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
O4 - HKLM\..\Run: [cFosSpeed] C:\Program Files\cFosSpeed\cFosSpeed.exe
O4 - HKLM\..\Run: [FileZilla Server Interface] "C:\Program Files\FileZilla Server\FileZilla Server Interface.exe"
O4 - HKLM\..\Run: [NeroFilterCheck] C:\Program Files\Common Files\Nero\Lib\NeroCheck.exe
O4 - HKLM\..\Run: [NBKeyScan] "C:\Program Files\Nero\Nero8\Nero BackItUp\NBKeyScan.exe"
O4 - HKLM\..\Run: [AVP] "C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\avp.exe"
O4 - HKLM\..\Run: [Acrobat Assistant 7.0] "C:\Program Files\Adobe\Acrobat 7.0\Distillr\Acrotray.exe"
O4 - HKCU\..\Run: [IDMan] C:\Program Files\Internet Download Manager\IDMan.exe /onboot
O4 - HKCU\..\Run: [IndxStoreSvr_{79662E04-7C6C-4d9f-84C7-88D8A56B10AA}] "C:\Program Files\Common Files\Nero\Lib\NMIndexStoreSvr.exe" ASO-616B5711-6DAE-4795-A05F-39A1E5104020
O4 - HKCU\..\Run: [EA Core] C:\Program Files\Electronic Arts\EADM\Core.exe -silent
O4 - HKCU\..\Run: [Skype] "C:\Program Files\Skype\Phone\Skype.exe" /nosplash /minimized
O4 - Startup: FIFA 09 Registration.lnk = C:\Program Files\EA Sports\FIFA 09\Support\EAregister.exe
O4 - Startup: LimeWire On Startup.lnk = C:\Program Files\LimeWire\LimeWire.exe
O4 - Global Startup: Adobe Acrobat Speed Launcher.lnk = ?
O8 - Extra context menu item: Convert link target to Adobe PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIECapture.html
O8 - Extra context menu item: Convert link target to existing PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIEAppend.html
O8 - Extra context menu item: Convert selected links to Adobe PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIECaptureSelLinks.html
O8 - Extra context menu item: Convert selected links to existing PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIEAppendSelLinks.html
O8 - Extra context menu item: Convert selection to Adobe PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIECapture.html
O8 - Extra context menu item: Convert selection to existing PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIEAppend.html
O8 - Extra context menu item: Convert to Adobe PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIECapture.html
O8 - Extra context menu item: Convert to existing PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIEAppend.html
O8 - Extra context menu item: Download all links with IDM - C:\Program Files\Internet Download Manager\IEGetAll.htm
O8 - Extra context menu item: Download FLV video content with IDM - C:\Program Files\Internet Download Manager\IEGetVL.htm
O8 - Extra context menu item: Download with IDM - C:\Program Files\Internet Download Manager\IEExt.htm
O8 - Extra context menu item: E&xport to Microsoft Excel - res://C:\PROGRA~1\MICROS~2\OFFICE11\EXCEL.EXE/3000
O9 - Extra button: (no name) - {08B0E5C0-4FCB-11CF-AAA5-00401C608501} - C:\Program Files\Java\jre1.6.0_03\bin\ssv.dll
O9 - Extra 'Tools' menuitem: Sun Java Console - {08B0E5C0-4FCB-11CF-AAA5-00401C608501} - C:\Program Files\Java\jre1.6.0_03\bin\ssv.dll
O9 - Extra button: Web Anti-Virus statistics - {1F460357-8A94-4D71-9CA3-AA4ACF32ED8E} - C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\SCIEPlgn.dll
O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~2\OFFICE11\REFIEBAR.DLL
O9 - Extra button: (no name) - {9819CC0E-9669-4D01-9CD7-2C66DA43AC6C} - (no file)
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O16 - DPF: {78AF2F24-A9C3-11D3-BF8C-0060B0FCC122} (AcDcToday Control) - file://C:\Program Files\AutoCAD 2002\AcDcToday.ocx
O16 - DPF: {AE563720-B4F5-11D4-A415-00108302FDFD} (NOXLATE-BANR) - file://C:\Program Files\AutoCAD 2002\InstBanr.ocx
O16 - DPF: {C6637286-300D-11D4-AE0A-0010830243BD} (InstaFred) - file://C:\Program Files\AutoCAD 2002\InstFred.ocx
O16 - DPF: {F281A59C-7B65-11D3-8617-0010830243BD} (AcPreview Control) - file://C:\Program Files\AutoCAD 2002\AcPreview.ocx
O17 - HKLM\System\CCS\Services\Tcpip\..\{48966894-3373-4E88-965A-41CB006BDA0A}: NameServer = 202.188.0.133 202.188.1.5
O18 - Protocol: skype4com - {FFC8B962-9B40-4DFF-9458-1830C7DD7F5D} - C:\PROGRA~1\COMMON~1\Skype\SKYPE4~1.DLL
O23 - Service: Adobe LM Service - Adobe Systems - C:\Program Files\Common Files\Adobe Systems Shared\Service\Adobelmsvc.exe
O23 - Service: Ati HotKey Poller - Unknown owner - C:\WINDOWS\system32\Ati2evxx.exe
O23 - Service: Kaspersky Anti-Virus 7.0 (AVP) - Kaspersky Lab - C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\avp.exe
O23 - Service: cFosSpeed System Service (cFosSpeedS) - cFos Software GmbH - C:\Program Files\cFosSpeed\spd.exe
O23 - Service: FileZilla Server FTP server (FileZilla Server) - FileZilla Project - C:\Program Files\FileZilla Server\FileZilla Server.exe
O23 - Service: Freenet 0.7 darknet-8888 (freenet-darknet-8888) - Unknown owner - C:\Program Files\Freenet\bin\wrapper-windows-x86-32.exe (file missing)
O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:\Program Files\Common Files\InstallShield\Driver\11\Intel 32\IDriverT.exe
O23 - Service: Nero BackItUp Scheduler 3 - Nero AG - C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
O23 - Service: NMIndexingService - Nero AG - C:\Program Files\Common Files\Nero\Lib\NMIndexingService.exe
O23 - Service: PLFlash DeviceIoControl Service - Prolific Technology Inc. - C:\WINDOWS\system32\IoctlSvc.exe

--
End of file - 9032 bytes

-texas5-

Anonymous Says :
November 20, 2008 at 2:14 AM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.19.2008 13:12
IP address: 219.93.xxx.xx

TCP options string: 020405500103030101010402
MSS: 1360
MTU: 1400
TCP Window: 128000 (NOT multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64000
Recommended RWINs: 65280, 130560, 261120, 522240, 1044480
BDP limit (200ms): 5120kbps (640KBytes/s)
BDP limit (500ms): 2048kbps (256KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

-texas5-

Anonymous Says :
November 20, 2008 at 2:26 AM

ok skang nie ko kene uninstall cFosSpeed, dan clean pc ko with Ccleaner, pastikan tiada kesan-kesan tinggalan dari cFosSpeed, run HijackThis then pastikan tiada lagi cFosSpeed file...pastue rebooted pc...connect internet then post new TCP Analyzer Results...

Anonymous Says :
November 20, 2008 at 3:08 AM

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 3:07:44, on 11/20/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\Ati2evxx.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\avp.exe
C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
C:\WINDOWS\system32\IoctlSvc.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\AGRSMMSG.exe
C:\PROGRA~1\LAUNCH~1\CPLFL32.EXE
C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe
C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\avp.exe
C:\Program Files\Adobe\Acrobat 7.0\Distillr\Acrotray.exe
C:\Program Files\Internet Download Manager\IDMan.exe
C:\Program Files\Common Files\Nero\Lib\NMIndexStoreSvr.exe
C:\Program Files\Electronic Arts\EADM\Core.exe
C:\Program Files\Skype\Phone\Skype.exe
C:\Program Files\Adobe\Acrobat 7.0\Acrobat\acrobat_sl.exe
C:\Program Files\LimeWire\LimeWire.exe
C:\Program Files\Common Files\Nero\Lib\NMIndexingService.exe
C:\Program Files\Internet Download Manager\IEMonitor.exe
C:\Program Files\Skype\Plugin Manager\skypePM.exe
C:\WINDOWS\system32\wuauclt.exe
C:\Program Files\Huawei technologies\Mobile Connect\Mobile Connect.exe
C:\PROGRA~1\Mozilla Firefox\firefox.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\Program Files\Yahoo!\Companion\Installs\cpn\yt.dll
F2 - REG:system.ini: UserInit=userinit.exe,
O2 - BHO: IDMIEHlprObj Class - {0055C089-8582-441B-A0BF-17B458C2A3A8} - C:\Program Files\Internet Download Manager\IDMIECC.dll
O2 - BHO: Yahoo! Toolbar Helper - {02478D38-C3F9-4EFB-9B51-7695ECA05670} - C:\Program Files\Yahoo!\Companion\Installs\cpn\yt.dll
O2 - BHO: AcroIEHlprObj Class - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Adobe\Acrobat 7.0\ActiveX\AcroIEHelper.dll
O2 - BHO: SSVHelper Class - {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - C:\Program Files\Java\jre1.6.0_03\bin\ssv.dll
O2 - BHO: AcroIEToolbarHelper Class - {AE7CD045-E861-484f-8273-0445EE161910} - C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll
O3 - Toolbar: Adobe PDF - {47833539-D0C5-4125-9FA8-0819E2EAAC93} - C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll
O3 - Toolbar: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\Program Files\Yahoo!\Companion\Installs\cpn\yt.dll
O4 - HKLM\..\Run: [SoundMan] SOUNDMAN.EXE
O4 - HKLM\..\Run: [AGRSMMSG] AGRSMMSG.exe
O4 - HKLM\..\Run: [ATIModeChange] Ati2mdxx.exe
O4 - HKLM\..\Run: [LManager] C:\PROGRA~1\LAUNCH~1\CPLFL32.EXE
O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre1.6.0_03\bin\jusched.exe"
O4 - HKLM\..\Run: [AutoShutdown] C:\PROGRA~1\AUTOSH~1\AutoShutdown.exe
O4 - HKLM\..\Run: [HP Software Update] C:\Program Files\HP\HP Software Update\HPWuSchd2.exe
O4 - HKLM\..\Run: [FileZilla Server Interface] "C:\Program Files\FileZilla Server\FileZilla Server Interface.exe"
O4 - HKLM\..\Run: [NeroFilterCheck] C:\Program Files\Common Files\Nero\Lib\NeroCheck.exe
O4 - HKLM\..\Run: [NBKeyScan] "C:\Program Files\Nero\Nero8\Nero BackItUp\NBKeyScan.exe"
O4 - HKLM\..\Run: [AVP] "C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\avp.exe"
O4 - HKLM\..\Run: [Acrobat Assistant 7.0] "C:\Program Files\Adobe\Acrobat 7.0\Distillr\Acrotray.exe"
O4 - HKCU\..\Run: [IDMan] C:\Program Files\Internet Download Manager\IDMan.exe /onboot
O4 - HKCU\..\Run: [IndxStoreSvr_{79662E04-7C6C-4d9f-84C7-88D8A56B10AA}] "C:\Program Files\Common Files\Nero\Lib\NMIndexStoreSvr.exe" ASO-616B5711-6DAE-4795-A05F-39A1E5104020
O4 - HKCU\..\Run: [EA Core] C:\Program Files\Electronic Arts\EADM\Core.exe -silent
O4 - HKCU\..\Run: [Skype] "C:\Program Files\Skype\Phone\Skype.exe" /nosplash /minimized
O4 - Startup: FIFA 09 Registration.lnk = C:\Program Files\EA Sports\FIFA 09\Support\EAregister.exe
O4 - Startup: LimeWire On Startup.lnk = C:\Program Files\LimeWire\LimeWire.exe
O4 - Global Startup: Adobe Acrobat Speed Launcher.lnk = ?
O8 - Extra context menu item: Convert link target to Adobe PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIECapture.html
O8 - Extra context menu item: Convert link target to existing PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIEAppend.html
O8 - Extra context menu item: Convert selected links to Adobe PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIECaptureSelLinks.html
O8 - Extra context menu item: Convert selected links to existing PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIEAppendSelLinks.html
O8 - Extra context menu item: Convert selection to Adobe PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIECapture.html
O8 - Extra context menu item: Convert selection to existing PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIEAppend.html
O8 - Extra context menu item: Convert to Adobe PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIECapture.html
O8 - Extra context menu item: Convert to existing PDF - res://C:\Program Files\Adobe\Acrobat 7.0\Acrobat\AcroIEFavClient.dll/AcroIEAppend.html
O8 - Extra context menu item: Download all links with IDM - C:\Program Files\Internet Download Manager\IEGetAll.htm
O8 - Extra context menu item: Download FLV video content with IDM - C:\Program Files\Internet Download Manager\IEGetVL.htm
O8 - Extra context menu item: Download with IDM - C:\Program Files\Internet Download Manager\IEExt.htm
O8 - Extra context menu item: E&xport to Microsoft Excel - res://C:\PROGRA~1\MICROS~2\OFFICE11\EXCEL.EXE/3000
O9 - Extra button: (no name) - {08B0E5C0-4FCB-11CF-AAA5-00401C608501} - C:\Program Files\Java\jre1.6.0_03\bin\ssv.dll
O9 - Extra 'Tools' menuitem: Sun Java Console - {08B0E5C0-4FCB-11CF-AAA5-00401C608501} - C:\Program Files\Java\jre1.6.0_03\bin\ssv.dll
O9 - Extra button: Web Anti-Virus statistics - {1F460357-8A94-4D71-9CA3-AA4ACF32ED8E} - C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\SCIEPlgn.dll
O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~2\OFFICE11\REFIEBAR.DLL
O9 - Extra button: (no name) - {9819CC0E-9669-4D01-9CD7-2C66DA43AC6C} - (no file)
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O16 - DPF: {78AF2F24-A9C3-11D3-BF8C-0060B0FCC122} (AcDcToday Control) - file://C:\Program Files\AutoCAD 2002\AcDcToday.ocx
O16 - DPF: {AE563720-B4F5-11D4-A415-00108302FDFD} (NOXLATE-BANR) - file://C:\Program Files\AutoCAD 2002\InstBanr.ocx
O16 - DPF: {C6637286-300D-11D4-AE0A-0010830243BD} (InstaFred) - file://C:\Program Files\AutoCAD 2002\InstFred.ocx
O16 - DPF: {F281A59C-7B65-11D3-8617-0010830243BD} (AcPreview Control) - file://C:\Program Files\AutoCAD 2002\AcPreview.ocx
O17 - HKLM\System\CCS\Services\Tcpip\..\{48966894-3373-4E88-965A-41CB006BDA0A}: NameServer = 202.188.0.133 202.188.1.5
O18 - Protocol: skype4com - {FFC8B962-9B40-4DFF-9458-1830C7DD7F5D} - C:\PROGRA~1\COMMON~1\Skype\SKYPE4~1.DLL
O23 - Service: Adobe LM Service - Adobe Systems - C:\Program Files\Common Files\Adobe Systems Shared\Service\Adobelmsvc.exe
O23 - Service: Ati HotKey Poller - Unknown owner - C:\WINDOWS\system32\Ati2evxx.exe
O23 - Service: Kaspersky Anti-Virus 7.0 (AVP) - Kaspersky Lab - C:\Program Files\Kaspersky Lab\Kaspersky Anti-Virus 7.0\avp.exe
O23 - Service: FileZilla Server FTP server (FileZilla Server) - FileZilla Project - C:\Program Files\FileZilla Server\FileZilla Server.exe
O23 - Service: Freenet 0.7 darknet-8888 (freenet-darknet-8888) - Unknown owner - C:\Program Files\Freenet\bin\wrapper-windows-x86-32.exe (file missing)
O23 - Service: InstallDriver Table Manager (IDriverT) - Macrovision Corporation - C:\Program Files\Common Files\InstallShield\Driver\11\Intel 32\IDriverT.exe
O23 - Service: Nero BackItUp Scheduler 3 - Nero AG - C:\Program Files\Nero\Nero8\Nero BackItUp\NBService.exe
O23 - Service: NMIndexingService - Nero AG - C:\Program Files\Common Files\Nero\Lib\NMIndexingService.exe
O23 - Service: PLFlash DeviceIoControl Service - Prolific Technology Inc. - C:\WINDOWS\system32\IoctlSvc.exe

--
End of file - 8818 bytes

-texas5-

Anonymous Says :
November 20, 2008 at 3:09 AM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.19.2008 14:06
IP address: 219.93.xxx.xx

TCP options string: 020405780103030101010402
MSS: 1400
MTU: 1440
TCP Window: 128000 (NOT multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 64000
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 5120kbps (640KBytes/s)
BDP limit (500ms): 2048kbps (256KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

-texas5-

Anonymous Says :
November 20, 2008 at 3:16 AM

ok..texas5, seems all ok..now try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1440
TTL - 64
TCP Receive Window - 257600
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.
When correctly done, TCP Window should become 257600.

Anonymous Says :
November 20, 2008 at 3:35 AM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.19.2008 14:33
IP address: 219.93.xxx.xxx

TCP options string: 020405780103030c01010402
MSS: 1400
MTU: 1440
TCP Window: 134217728 (NOT multiple of MSS)
RWIN Scaling: 12 bits (2^12=4096)
Unscaled RWIN : 32768
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 5368709kbps (671089KBytes/s)
BDP limit (500ms): 2147484kbps (268435KBytes/s)
MTU Discovery: ON
TTL: 47
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

lain je TCP Window 2...

Anonymous Says :
November 20, 2008 at 4:57 AM

Rerun the settings I gave. When correctly done, TCP Window should become 257600.

Anonymous Says :
November 20, 2008 at 5:06 AM

Pastikan ko ikut semua setting yg aku bagi tue and last skali baru ko masukkan TCP Receive Window - 257600...wat tripple check utk avoid kesalahan...apply then reboot pc...

Anonymous Says :
November 20, 2008 at 5:14 AM

Disebabkan kiternyer MTU samer jadi yg nie contoh TCP Analyzer Result aku selepas aku tweak, jadi ko leh arr refer....

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.19.2008 16:12
IP address: 219.93.xxx.xx

TCP options string: 020405780103030201010402
MSS: 1400
MTU: 1440
TCP Window: 257600 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64400
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 10304kbps (1288KBytes/s)
BDP limit (500ms): 4122kbps (515KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

Anonymous Says :
November 20, 2008 at 5:21 AM

Aku raser ko kene wat reset kat TCP IP ko coz CFossSpeed beri byk effect yang negatif kat Unscaled RWIN : 32768 ko then biler ko nak set TCP Window, jadi stuck...

Anonymous Says :
November 20, 2008 at 5:28 AM

Kalau ko guner Kaspersky Antivirus pastikan port 8080 x block. Nie thread yg telah aku post kat speed guide.net>>

I've been stuck manually changing my rwin value in the registry, yet every test still showed it as the default value. I also use Kaspersky, and unchecking Port 8080 worked like a charm.

p/s*I got it working disabling port 8080 from being used by mail anti-virus, web anti-virus, privacy control etc.
Anyway to disable this port go under configuration-traffic monitoring-port configurations and uncheck "Http general 8080".

Anonymous Says :
November 20, 2008 at 5:52 AM

How to unblock port on kaspersky? Ok here the descripton;
1.open kaspersky > setting > Traffic monitoring > Port settings > uncheck General HTTP 8080 > ok

Anonymous Says :
November 20, 2008 at 2:08 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.20.2008 01:06
IP address: 219.93.xxx.xxx

TCP options string: 020405b40103030101010402
MSS: 1460
MTU: 1500
TCP Window: 130680 (NOT multiple of MSS)
RWIN Scaling: 1 bits (2^1=2)
Unscaled RWIN : 65340
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 5227kbps (653KBytes/s)
BDP limit (500ms): 2091kbps (261KBytes/s)
MTU Discovery: ON
TTL: 47
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

en. napster
mintak tolong tgk analyzer aku nih
aku pakai celcom d98

Zar

Anonymous Says :
November 20, 2008 at 5:07 PM

naps kalu modem blue cube ni.. salu gak jd masalah cam texas5.. tp kdg2 ok plak.. bile reboot pun xleh gak.. kdg2 tu kne tunggu lama2 baru ok.. tu yg aku xngerti.. lagi 1 die salu jadi connected tp xleh surf.. cam xde internet.. kat tray icon pun xnyala.. kdg2 je nyala tp putus2.. tu yg aku pelik tu... ade x cara utk mngatasi masalh yg amat pelik ni...

p/s: time internet ok, sume ok skrg ni samada masalh modem atau celcom sndri... any suggestion ?? salam.. thnx bro.

-Hazeem-

Anonymous Says :
November 20, 2008 at 7:16 PM

hello Hazeem,
texas5 pakai modem cam aku, Hmm...4 hari yang lepas aku ader kat penang then masalah yg ko cakap tue berlaku kat aku macam connected ok tapi x leh nak browse...tapi lepas aku balik jer Ipoh tiba-tiba lak ok, kadang-kadang x ok...mengikut pandangan aku celcom sendiri yang mempunyai masalah...biler aku connected kat Mac OSX Leopard aku maser kat Penang kuar error remote server connection has been disconnected...maknernyer nie kawalan dari celcom...dulu aku raser ok jer...sekarang nie jer byk masalah...call celcom and dorang cakap ada failure kat seluruh malaysia…Maybe celcom ngah upgrade or maintainence their line secara berperingkat-peringkat mengikut tempat, x pun ader kerosakan pada hardware dorang...reception wire problem...

Anonymous Says :
November 20, 2008 at 7:30 PM

For Zar...what OS you use? modem model?..Anyway try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1500
TTL - 64
TCP Receive Window - 256960
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.
*When correctly done, TCP Window should become 256960.

Anonymous Says :
November 20, 2008 at 8:48 PM

aku pun rase camtu gak naps tp kdg2 celcom ni mmg mnguji ksabaran... tp xksah jnji dpt gune tenet.. semalam aku kat putrajaya layan je ade hsdpa.. huhuhu.. thnx naps kdg2 celcom careline ni wat lawak gak.. salu bagi alasan yg klakar.. contohnya.. "apa kata kalau encik tukar kawasan" aku pun fikir la salu line ok je xkan la skali je fail nak kne pindah huhuhu....

Anonymous Says :
November 20, 2008 at 9:50 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.20.2008 08:33
IP address: 219.93.xxx.xx

TCP options string: 02040582010303000101080a000000000000000001010402
MSS: 1410
MTU: 1450
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64860, 129720, 259440, 518880, 1037760
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: ON
SACKs: ON
IP ToS: 00000000 (0)

celcom d68 3.6mps
window xp2

please help me bro. 3g coverage at my place sometimes not stable and automatically switch to gprs. at present moment,i'm running on gprs. very slow and very hard for me to download anything.

Anonymous Says :
November 20, 2008 at 11:17 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.20.2008 10:11
IP address: 219.93.xxx.xx

TCP options string: 020405b40103030201010402
MSS: 1460
MTU: 1500
TCP Window: 256960 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64240
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 10278kbps (1285KBytes/s)
BDP limit (500ms): 4111kbps (514KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)


I use winxp sp3 modem huawei E220

zar

Anonymous Says :
November 20, 2008 at 11:20 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.20.2008 09:58
IP address: 219.93.xxx.xx

TCP options string: 020405780103030201010402
MSS: 1400
MTU: 1440
TCP Window: 257600 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64400
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 10304kbps (1288KBytes/s)
BDP limit (500ms): 4122kbps (515KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

[URL=http://www.speedtest.net][IMG]http://www.speedtest.net/result/359225181.png[/IMG][/URL]

Anonymous Says :
November 21, 2008 at 1:54 AM

for pharmacist seems your TCP Analyzer Results is ok...I prefer you not to test speed in penang now coz a lot of trouble from celcom this month...

MUST DO A TIPS BELOW

1. Tweaks for firefox >>
http://amenapster.blogspot.com/2008/09/make-firefox-browser-run-at-full-speed.html also use fasterfox.

2. Gpedit tips >>
http://amenapster.blogspot.com/2008/09/how-to-speed-up-your-broadband-internet.html

3. Use a Ccleaner to clean your pc >> http://www.filehippo.com/ (Browse for Ccleaner then download)

4. High recomended clean your pc from any virus, spyware, adware and etc.

5. That's the nature of an internet connection over a mobile phone line. Much depends on your distant and clear line of sight to the cell tower and the clarity of the airwave.

Anonymous Says :
November 21, 2008 at 1:59 AM

For zar, do a tips above and try to run speedtest.net >> http://www.speedtest.net/

Anonymous Says :
November 21, 2008 at 2:36 AM

For Anonymous at November 20, 2008 7:17 AM,
1. Setting your dashboard software and choose connection type to 3G Only..

2. Try the following with TCP Optimizer:
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1450
TTL - 64
TCP Receive Window - 129720
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.
*When correctly done, TCP Window should become 129720.

Anonymous Says :
November 21, 2008 at 3:32 AM

thanx napster.a lot of tips u gave to me.aku tngh format laptop aku ni.byk sgt bnda2 yg memberatkn.nnti aku post blk setting aku bleh??ko tlg tngk2 kn ekk.emmm,lagi stu nk tnya.setting ni sesuai utk sume kwsan ke???kalu aku blk kmpg cmne??nk kene setting blk ke???and...which antivirus do u use???kaspersky???

-texas5-

Anonymous Says :
November 21, 2008 at 5:21 AM

Hello texas5...
1. Bolehnyer...hu3.
2. Yup..kat maner2 kwsn pun ko berader setting tue memang sesuai selagi ko pakai modem tue..kecuali kalau pakai vista memang berbeza.
3. Kaspersky Internet Security 7.0 and Malwarebytes' Anti-Malware 1.30.

Anonymous Says :
November 21, 2008 at 3:21 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.21.2008 02:18
IP address: 219.93.xxx.xx

TCP options string: 0204057801010402
MSS: 1400
MTU: 1440
TCP Window: 16800 (multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 16800
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 672kbps (84KBytes/s)
BDP limit (500ms): 269kbps (34KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

pasni wat TCP Optimizer...btoi x napster...huhuhu

-texas5-

Anonymous Says :
November 21, 2008 at 4:18 PM

lagi stu aku nk tnya.apsal aku pnye broadband(umts) ni slalu disconnect ekk.tension gua.tngh sedap donlod tiba2 dia DC x pasal2.ke sbb modem huawei ni problem.yg ko pnya OK x???

-texas5-

Anonymous Says :
November 21, 2008 at 7:04 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.21.2008 05:58
IP address: 219.93.xxx.xx

TCP options string: 020405820103030001010402
MSS: 1410
MTU: 1450
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64860, 129720, 259440, 518880, 1037760
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 47
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

Bro naps, this is the latest tcp analyzer used setting that u gave to me this morning. So, any comment?
-arn-

Anonymous Says :
November 21, 2008 at 7:33 PM

ok for texas5, weh...akunyer ok jer, x der masalah pun...cuber ko set kat software dashboard tue 3G Only...skang ko kat penang kan?...kat penang celcom problem arr skang nih, bukan masalah modem..

ok....
Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1440
TTL - 64
TCP Receive Window - 257600
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.

Anonymous Says :
November 21, 2008 at 7:39 PM

Hello arn...
1. TCP Window masih lagi x bertukar...
Rerun the settings I gave. When correctly done, TCP Window should become 129720.

2. Try the following with TCP Optimizer:
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1450
TTL - 64
TCP Receive Window - 129720
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.

Anonymous Says :
November 22, 2008 at 1:04 AM

mine ...

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.21.2008 11:58
IP address: 219.93.xxx.xx

TCP options string: 020405b4
MSS: 1460
MTU: 1500
TCP Window: 32768 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 32768
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 1311kbps (164KBytes/s)
BDP limit (500ms): 524kbps (66KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: OFF
IP ToS: 00000000 (0)

winxp sp3,celcom d68 .... what setting for optimizing my network

Anonymous Says :
November 22, 2008 at 2:50 AM

Hello mosaih,
Using Kaspersky?
Seems your kaspersky has block your RWIN.

How to unblock port on kaspersky? Ok here the descripton;
1.open kaspersky > setting > Traffic monitoring > Port settings > uncheck General HTTP 8080 > ok
2. Post a new TCP Analyzer report after port open.

Anonymous Says :
November 22, 2008 at 3:58 PM

hi napster.i've detected the problem i occur before.it came frm my laptop man.my usb port broken.gile ahh...mampuih aku cmni.kena bli cpu sebijik ar pulak lepaih nie.

-texas5-

Anonymous Says :
November 22, 2008 at 9:19 PM

usb port broken?...canner leh jadik camtue?...

Anonymous Says :
November 22, 2008 at 9:47 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.22.2008 08:43
IP address: 219.93.xxx.xx

TCP options string: 020405820103030001010402
MSS: 1410
MTU: 1450
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64860, 129720, 259440, 518880, 1037760
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 47
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

Bro naps, this is the latest one using setting that u gave me, already triple check, so now what?

-arn-

Anonymous Says :
November 22, 2008 at 10:45 PM

Hello arn...
hmm...noob..TCP Windows still not changed at all..are you sure that ur windows is xp? ok..
1. Download & Install HijackThis, do a scan and paste log file here...

Anonymous Says :
November 23, 2008 at 4:03 AM

problem solved...hahaha...

ni result selepas aku wat TCP Optimizer:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.22.2008 15:01
IP address: 219.93.xxx.xx

TCP options string: 020405780103030201010402
MSS: 1400
MTU: 1440
TCP Window: 257600 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64400
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 10304kbps (1288KBytes/s)
BDP limit (500ms): 4122kbps (515KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

ok x 2???

-texas5-

Anonymous Says :
November 23, 2008 at 4:10 AM

aku kt ipoh.window xp sp2.package d98.modem same ngan ko n kt cni dpt coverage hsdpa...

-texas5-

Anonymous Says :
November 23, 2008 at 4:31 AM

wehh..da ok da?
..hmmm...your TCP Analyzer Results seems ok...pastikan modem tue tidak berada terlalu dekat dengan brg2 elektrik lain, ini juga untuk mengelakkan gangguan frekuensi-frekuensi dari brgn elektrik tersebut....then pastikan modem tue berader berhampiran dengan tingkap or tempat terbuka untuk menguatkan lagi signal anda...heh..So kat sinie ko leh naikkan at least 2 bar lagi signal 3G, GPRS, HSDPA ko dan guess what? it works ps*nampak cam lawak jer tapi memang berkesan!! i tryin 10 times and got improvement so ko leh try…
Nie link for instruction >> http://www.wangcyber.com/forum/sembang-umum/4745-teknik-bagaimana-nak-menaikkan-signal-3g-card-sierra-wirelesss.html

Anonymous Says :
November 23, 2008 at 4:46 AM

hehehehe...ok da.weh,ko pkai teknik yg mane stu???yg teknik cd 2 ke???
emmm...ni kire dah abih ar ni ekk setting broadband aku nie.ke ade nak kene setting lg.niway.thanx napster.u r so kind...

-texas5-

Anonymous Says :
November 23, 2008 at 4:58 AM

kadang2 biler aku tengok jer teknik2 tue cam lawak pun ader..mula2 tengok memang nak pecah perut aku gelak...tapi biler aku test yg cd tue, terkejut gak aku, 3 signal bar naik..hmm texas5 tips yg gpedit, firefox tue semua ko da wat?

Anonymous Says :
November 23, 2008 at 5:02 AM

dah wat dah.heh heh heh.btoi2 ke mnjadik teknik 2.ish...cam pelik je...

Anonymous Says :
November 23, 2008 at 5:10 AM

tue la pasal...tapi yg cd memang menjadi...hehehe..ha..ader satu lagi..skang ko pakai antivirus aper?

Anonymous Says :
November 23, 2008 at 5:15 AM

xpa2.nnti aku try.aku pkai KAV7.weh,giler ah ko pnya speed test.mencanak pegi nye....aku test dpt cukup2 mkn jer...huhuhu...

Anonymous Says :
November 23, 2008 at 5:25 AM

1. owh...skang ko gie kat Network Connections, right click kat HUAWEI3G. then klik properties, tab Networking, unselect Kaspersky Anti-Virus NDIS Filter, klik ok, disconnect then connect balik...
2. HSDPA aku full bar...pastue 50 meter jer ngan pencawang celcom kat penang, bagan lebai tahir..tue pasal speed dia mencanak naik tue..

Anonymous Says :
November 23, 2008 at 5:45 AM

owh.orait2.ni tngh ader kt USM la ni.wei,trima kaseh bebanyak geng coz tlg setting bb aku ni.hehe.ngah final ke beb???

Anonymous Says :
November 23, 2008 at 5:51 AM

emmm...tnya skit.ape maksud "network adapter selection - your NIC" time gune tcp optimizer 2???nak select yg maner???aku maen ambik je yg 1394 Net Adapter.

-texas5-

Anonymous Says :
November 23, 2008 at 6:04 AM

ok..x der hal nyerr..owh..yg tue ko abaikan jer..janji ko da select Modify All Network Adapters...

Anonymous Says :
November 23, 2008 at 7:47 AM

salam bro napster
camne nak setting bitcomet aku ni bg laju sket
akunye hsdpa speedtest 1700kbps download 55kbps upload, tapi bila run bitcomet, download x lebih 20kbps pun, padahal seed 3000 lebih

Anonymous Says :
November 23, 2008 at 7:59 AM

Hello pharmacist...setting your bitcomet to limit.
1. Open BitComet 1.04, go to connection, global max upload rate set to 10.
2. Listen port, set to 60000 until 65528, you can choose.
3. On Port mapping uncheck all
4. Go to Advanced, click bittorent.max_connection _per_task set to 80, click network.max_connections set to 134
5. TCP IP limit set to 200. If you use win xp 2 use a third party to open up your TCP Limit. Try google this EvID4226Patch.exe and download.
6. Reboot your pc.
7. Now...after you set a limit on bitcomet you suppost get about 100kbps or plus download rate.
Then ignore the yellow thingy on bitcomet.

Anonymous Says :
November 23, 2008 at 8:49 AM

Hye pharmacist,
Seems your MTU have 1440, u can try do a experiment to change your TCP Window between 64400, 128800, 257600 and see the different result which one get better/higher speed and suitable for your broadband...

Anonymous Says :
November 23, 2008 at 11:13 AM

tEst pOst 1

Anonymous Says :
November 23, 2008 at 1:19 PM

naps salam. mmg agak klaka yg cd tu.. huhu tp skrg aku ade mslh ngn modem aku ni kat pc die xleh bukak tp kat laptop ok plak.. die kuar error "microsoft visual C++ runtime library" runtime error abnormal program termination.. skrg ni aku nak cek signal xleh da. tp nak connect boleh je sebab leh connect pkai tray right click je... try tgk http://i472.photobucket.com/albums/rr85/hazeem_88/error.jpg

thnx bro

-Hazeem-

Anonymous Says :
November 23, 2008 at 9:48 PM

Hello Hazeem...
Are you using a chipset VIA?

Anonymous Says :
November 23, 2008 at 10:03 PM

If you use a VIA chipset, try update your VIA 4in1 and graphic card driver...

Anonymous Says :
November 23, 2008 at 10:21 PM

If not help try another solution. Here's how to handle this type of problem: download a runtifix.exe
http://download.microsoft.com/download/streetstrips2000/Utility/1.0/WIN98/EN-US/Runtifix.exe
caution! : Do not run the Runtifix program now. Enable a clean start
1. Click Start, click Run, type msconfig in the Open box, and then click OK.
2. Click to select the Selective Startup check box, and then click to clear all the following check boxes: • Process SYSTEM.ini file • Process WIN.ini file • Load Startup Items
3. On the Services tab, click to select the Hide All Microsoft Services check box.
4. Click Disable All.
5. Click Apply, and then click Close to close the System Configuration Utility.
6. Click Restart when you are prompted to restart the computer. Then Install runtifix.exe Then all the problem will be solve. I hope it will help you solve your problem..

Anonymous Says :
November 23, 2008 at 10:26 PM

And the Hotfix from Microsoft try this one,
http://support.microsoft.com/kb/884538

Anonymous Says :
November 24, 2008 at 12:56 AM

naps. the problem still there... im using intel chipset.. i tried all solution that given by you.. its not working, i tried them like u told me to... the problem is still the same... thnx for the suggestion

-Hazeem-

Anonymous Says :
November 24, 2008 at 1:30 AM

Its more likely either a software bug or incompatability with some other software, rather than a virus/trojan, your best bet for a solution is to check the website that provides that application/driver
...install HijackThis, do a scan and paste log file here...

Anonymous Says :
November 24, 2008 at 12:02 PM

im afraid the problem is not virus or spyware because i always keep my pc clean...
here the log..

Logfile of HijackThis v1.99.1
Scan saved at 11:56:49 AM, on 11/24/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Unlocker\UnlockerAssistant.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\IObit\Advanced WindowsCare V2\MemCleaner.exe
C:\WINDOWS\system32\igfxpers.exe
C:\WINDOWS\system32\hkcmd.exe
C:\Program Files\Glass2k\Glass2k.exe
C:\Program Files\ESET\ESET NOD32 Antivirus\egui.exe
C:\Program Files\VistaDriveIcon\DrvIcon.exe
C:\Program Files\RocketDock\RocketDock.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\Rainmeter\Rainmeter.exe
C:\Program Files\DNA\btdna.exe
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\ESET\ESET NOD32 Antivirus\ekrn.exe
C:\Program Files\Java\jre6\bin\jqs.exe
C:\WINDOWS\system32\svchost.exe
C:\PROGRA~1\SPEEDB~1\VideoAcceleratorService.exe
C:\PROGRA~1\SPEEDB~1\VideoAcceleratorEngine.exe
C:\Program Files\BitComet\BitComet.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\HijackThis\HijackThis.exe

R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896
R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157
R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =
R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page =
R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - (no file)
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
O2 - BHO: BitComet ClickCapture - {39F7E362-828A-4B5A-BCAF-5B79BFDFEA60} - C:\Program Files\BitComet\tools\BitCometBHO_1.2.8.7.dll
O2 - BHO: Spybot-S&D IE Protection - {53707962-6F74-2D53-2644-206D7942484F} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O2 - BHO: Java(tm) Plug-In SSV Helper - {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - C:\Program Files\Java\jre6\bin\ssv.dll
O2 - BHO: (no name) - {7E853D72-626A-48EC-A868-BA8D5E23E045} - (no file)
O2 - BHO: Windows Live Sign-in Helper - {9030D464-4C02-4ABF-8ECC-5164760863C6} - C:\Program Files\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll
O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll
O2 - BHO: JQSIEStartDetectorImpl - {E7E6F031-17CE-4C07-BC86-EABFE594F69C} - C:\Program Files\Java\jre6\lib\deploy\jqs\ie\jqs_plugin.dll
O3 - Toolbar: StylerToolBar - {D2F8F919-690B-4EA2-9FA7-A203D1E04F75} - C:\Program Files\Styler\TB\StylerTB.dll
O4 - HKLM\..\Run: [UnlockerAssistant] "C:\Program Files\Unlocker\UnlockerAssistant.exe" -H
O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre6\bin\jusched.exe"
O4 - HKLM\..\Run: [SmartRAM] C:\Program Files\IObit\Advanced WindowsCare V2\MemCleaner.exe /m
O4 - HKLM\..\Run: [igfxtray] C:\WINDOWS\system32\igfxtray.exe
O4 - HKLM\..\Run: [igfxpers] C:\WINDOWS\system32\igfxpers.exe
O4 - HKLM\..\Run: [igfxhkcmd] C:\WINDOWS\system32\hkcmd.exe
O4 - HKLM\..\Run: [Glass2k] C:\Program Files\Glass2k\Glass2k.exe
O4 - HKLM\..\Run: [egui] "C:\Program Files\ESET\ESET NOD32 Antivirus\egui.exe" /hide /waitservice
O4 - HKLM\..\Run: [DrvIcon] C:\Program Files\VistaDriveIcon\DrvIcon.exe
O4 - HKCU\..\Run: [RocketDock] "C:\Program Files\RocketDock\RocketDock.exe"
O4 - HKCU\..\Run: [ctfmon.exe] C:\WINDOWS\system32\ctfmon.exe
O4 - HKCU\..\Run: [Winamp] C:\Program Files\Winamp\winamp.exe
O4 - HKCU\..\Run: [SpybotSD TeaTimer] C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
O4 - HKCU\..\Run: [Rainmeter] C:\Program Files\Rainmeter\Rainmeter.exe
O4 - HKCU\..\Run: [MySpaceIM] C:\Program Files\MySpace\IM\MySpaceIM.exe
O4 - HKCU\..\Run: [BitTorrent DNA] "C:\Program Files\DNA\btdna.exe"
O8 - Extra context menu item: &D&ownload &with BitComet - res://C:\Program Files\BitComet\BitComet.exe/AddLink.htm
O8 - Extra context menu item: &D&ownload all video with BitComet - res://C:\Program Files\BitComet\BitComet.exe/AddVideo.htm
O8 - Extra context menu item: &D&ownload all with BitComet - res://C:\Program Files\BitComet\BitComet.exe/AddAllLink.htm
O8 - Extra context menu item: &Download with &DAP - C:\Program Files\DAP\dapextie.htm
O8 - Extra context menu item: Download &all with DAP - C:\Program Files\DAP\dapextie2.htm
O8 - Extra context menu item: E&xport to Microsoft Excel - res://C:\PROGRA~1\MICROS~2\OFFICE11\EXCEL.EXE/3000
O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~2\OFFICE11\REFIEBAR.DLL
O9 - Extra button: BitComet - {D18A0B52-D63C-4ed0-AFC6-C1E3DC1AF43A} - res://C:\Program Files\BitComet\tools\BitCometBHO_1.2.8.7.dll/206 (file missing)
O9 - Extra button: (no name) - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O9 - Extra 'Tools' menuitem: Spybot - Search & Destroy Configuration - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O11 - Options group: [INTERNATIONAL] International*
O16 - DPF: {6E32070A-766D-4EE6-879C-DC1FA91D2FC3} (MUWebControl Class) - http://update.microsoft.com/microsoftupdate/v6/V5Controls/en/x86/client/muweb_site.cab?1222196752312
O17 - HKLM\System\CCS\Services\Tcpip\..\{81506689-1362-46BD-99A7-0FC5B2284A2D}: NameServer = 85.255.112.10;85.255.112.103
O17 - HKLM\System\CCS\Services\Tcpip\..\{EC18E341-7B60-4719-B87D-D12F6C3413B2}: NameServer = 208.67.222.222 208.67.220.220
O18 - Protocol: livecall - {828030A1-22C1-4009-854F-8E305202313F} - C:\PROGRA~1\Windows Live\Messenger\msgrapp.8.5.1302.1018.dll
O18 - Protocol: msnim - {828030A1-22C1-4009-854F-8E305202313F} - C:\PROGRA~1\Windows Live\Messenger\msgrapp.8.5.1302.1018.dll
O18 - Protocol: skype4com - {FFC8B962-9B40-4DFF-9458-1830C7DD7F5D} - C:\PROGRA~1\COMMON~1\Skype\SKYPE4~1.DLL
O20 - Winlogon Notify: igfxcui - C:\WINDOWS\SYSTEM32\igfxdev.dll
O20 - Winlogon Notify: WgaLogon - C:\WINDOWS\SYSTEM32\WgaLogon.dll
O21 - SSODL: WPDShServiceObj - {AAA288BA-9A4C-45B0-95D7-94D524869DB5} - C:\WINDOWS\system32\WPDShServiceObj.dll
O23 - Service: Lavasoft Ad-Aware Service (aawservice) - Lavasoft - C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
O23 - Service: Adobe LM Service - Unknown owner - C:\Program Files\Common Files\Adobe Systems Shared\Service\Adobelmsvc.exe
O23 - Service: Eset HTTP Server (EhttpSrv) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\EHttpSrv.exe
O23 - Service: Eset Service (ekrn) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\ekrn.exe
O23 - Service: Java Quick Starter (JavaQuickStarterService) - Unknown owner - C:\Program Files\Java\jre6\bin\jqs.exe" -service -config "C:\Program Files\Java\jre6\lib\deploy\jqs\jqs.conf (file missing)
O23 - Service: Kerio Personal Firewall (PersFw) - Kerio Technologies - C:\Program Files\Kerio\Personal Firewall\persfw.exe
O23 - Service: TuneUp Drive Defrag Service (TuneUp.Defrag) - TuneUp Software GmbH - C:\WINDOWS\System32\TuneUpDefragService.exe
O23 - Service: VideoAcceleratorService - Speedbit Ltd. - C:\PROGRA~1\SPEEDB~1\VideoAcceleratorService.exe

some service disable by me but still there such as speedbit video.. but i don think that apps disturbing my blue cube modem.. maybe you have the perfect solution..
p/s : i run karpersky online scan ocassionly.. i like karpersky antivirus but i dont like the proactive defense.. thnx bro naps

-Hazeem-

Anonymous Says :
November 24, 2008 at 2:12 PM

Hello Hazeem,
1. Try use a RegCure...Do a scan..This tool can fix it...
2. Use Ccleaner to clean your pc
3. Firstly, Please disable Spybot's TeaTimer by following the link below as it could interfere with the fixes.
http://russelltexas.com/malware/teatimer.htm
(You can reenable them once you are clean).

Open HJT and run another scan. Once it's completed the scan, look over the following entries I have listed, place a check in the boxes next to them as displayed. When you are doing this, make sure you have no browser windows open,

R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Page_URL = http://go.microsoft.com/fwlink/?LinkId=69157

R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Default_Search_URL = http://go.microsoft.com/fwlink/?LinkId=54896

R1 - HKLM\Software\Microsoft\Internet Explorer\Main,Search Page = http://go.microsoft.com/fwlink/?LinkId=54896

R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Start Page = http://go.microsoft.com/fwlink/?LinkId=69157

R0 - HKCU\Software\Microsoft\Internet Explorer\Main,Local Page =

R0 - HKLM\Software\Microsoft\Internet Explorer\Main,Local Page =

R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - (no file)

O8 - Extra context menu item: &Download with &DAP - C:\Program Files\DAP\dapextie.htm

O8 - Extra context menu item: Download &all with DAP - C:\Program Files\DAP\dapextie2.htm

O23 - Service: Java Quick Starter (JavaQuickStarterService) - Unknown owner - C:\Program Files\Java\jre6\bin\jqs.exe" -service -config "C:\Program Files\Java\jre6\lib\deploy\jqs\jqs.conf (file missing)

O23 - Service: VideoAcceleratorService - Speedbit Ltd. - C:\PROGRA~1\SPEEDB~1\VideoAcceleratorService.exe

Click fix checked,
Lastly, reboot normally and post a fresh log for further review..

Anonymous Says :
November 24, 2008 at 2:31 PM

Another solution,
1. Switch off WLAN & Bluetooth and then re-launch Connection Manager.

Anonymous Says :
November 24, 2008 at 3:23 PM

Go to Start > Run and type %temp% in the Run box, press OK . The Temp folder will open. Click Edit > Select All then Edit > Delete to delete the entire contents of that Temp folder.

Then go to C:\windows\temp and select EVERYTHING except temporary internet files, cookies and history folders and delete all that and then do the same for C:\temp

1) Open Control Panel
2) Click on Internet Options
3) On the General Tab, in the middle of the screen, click on Delete Files
4) Check the box "Delete all offline content"
5) Click on OK.....wait for the hourglass icon to stop after it deletes the temporary internet files
6) You can now click on "Delete Cookies" and click OK to delete cookies that websites have placed on your hard drive
==============================
Turn off System Restore:

On the Desktop, right-click My Computer.
Click Properties.
Click the System Restore tab.
Check Turn off System Restore.
Click Apply, and then click OK.
Restart your computer.(reverse these steps when clean)
===================================

You need to update your Java!!

Updating Java:

* Download the latest version of Java Runtime Environment (JRE) 5.0 Update 10.
* Scroll down to where it says "The J2SE Runtime Environment (JRE) allows end-users to run Java applications".
* Click the "Download" button to the right.
* Check the box that says: "Accept License Agreement".
* The page will refresh.
* Click on the link to download Windows Offline Installation with or without Multi-language and save to your desktop.
* Close any programs you may have running - especially your web browser.
* Go to Start > Control Panel double-click on Add/Remove programs and remove all older versions of Java.
* Check any item with Java Runtime Environment (JRE or J2SE) in the name.
* Click the Remove or Change/Remove button.
* Repeat as many times as necessary to remove each Java versions.
* Reboot your computer once all Java components are removed.
* Then from your desktop double-click on the download to install the newest version.

Anonymous Says :
November 24, 2008 at 6:17 PM

Logfile of HijackThis v1.99.1
Scan saved at 6:12:03 PM, on 11/24/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16735)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Unlocker\UnlockerAssistant.exe
C:\Program Files\Java\jre6\bin\jusched.exe
C:\Program Files\IObit\Advanced WindowsCare V2\MemCleaner.exe
C:\WINDOWS\system32\igfxpers.exe
C:\WINDOWS\system32\hkcmd.exe
C:\Program Files\ESET\ESET NOD32 Antivirus\egui.exe
C:\Program Files\VistaDriveIcon\DrvIcon.exe
C:\Program Files\RocketDock\RocketDock.exe
C:\WINDOWS\system32\ctfmon.exe
C:\Program Files\Winamp\winamp.exe
C:\Program Files\Rainmeter\Rainmeter.exe
C:\Program Files\DNA\btdna.exe
C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
C:\Program Files\ESET\ESET NOD32 Antivirus\ekrn.exe
C:\WINDOWS\system32\svchost.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\HijackThis\HijackThis.exe

O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
O2 - BHO: BitComet ClickCapture - {39F7E362-828A-4B5A-BCAF-5B79BFDFEA60} - C:\Program Files\BitComet\tools\BitCometBHO_1.2.8.7.dll
O2 - BHO: Spybot-S&D IE Protection - {53707962-6F74-2D53-2644-206D7942484F} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O2 - BHO: Java(tm) Plug-In SSV Helper - {761497BB-D6F0-462C-B6EB-D4DAF1D92D43} - C:\Program Files\Java\jre6\bin\ssv.dll
O2 - BHO: Windows Live Sign-in Helper - {9030D464-4C02-4ABF-8ECC-5164760863C6} - C:\Program Files\Common Files\Microsoft Shared\Windows Live\WindowsLiveLogin.dll
O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files\Java\jre6\bin\jp2ssv.dll
O2 - BHO: JQSIEStartDetectorImpl - {E7E6F031-17CE-4C07-BC86-EABFE594F69C} - C:\Program Files\Java\jre6\lib\deploy\jqs\ie\jqs_plugin.dll
O3 - Toolbar: StylerToolBar - {D2F8F919-690B-4EA2-9FA7-A203D1E04F75} - C:\Program Files\Styler\TB\StylerTB.dll
O4 - HKLM\..\Run: [UnlockerAssistant] "C:\Program Files\Unlocker\UnlockerAssistant.exe" -H
O4 - HKLM\..\Run: [SunJavaUpdateSched] "C:\Program Files\Java\jre6\bin\jusched.exe"
O4 - HKLM\..\Run: [SmartRAM] C:\Program Files\IObit\Advanced WindowsCare V2\MemCleaner.exe /m
O4 - HKLM\..\Run: [igfxtray] C:\WINDOWS\system32\igfxtray.exe
O4 - HKLM\..\Run: [igfxpers] C:\WINDOWS\system32\igfxpers.exe
O4 - HKLM\..\Run: [igfxhkcmd] C:\WINDOWS\system32\hkcmd.exe
O4 - HKLM\..\Run: [Glass2k] C:\Program Files\Glass2k\Glass2k.exe
O4 - HKLM\..\Run: [egui] "C:\Program Files\ESET\ESET NOD32 Antivirus\egui.exe" /hide /waitservice
O4 - HKLM\..\Run: [DrvIcon] C:\Program Files\VistaDriveIcon\DrvIcon.exe
O4 - HKCU\..\Run: [RocketDock] "C:\Program Files\RocketDock\RocketDock.exe"
O4 - HKCU\..\Run: [ctfmon.exe] C:\WINDOWS\system32\ctfmon.exe
O4 - HKCU\..\Run: [Winamp] C:\Program Files\Winamp\winamp.exe
O4 - HKCU\..\Run: [Rainmeter] C:\Program Files\Rainmeter\Rainmeter.exe
O4 - HKCU\..\Run: [MySpaceIM] C:\Program Files\MySpace\IM\MySpaceIM.exe
O4 - HKCU\..\Run: [BitTorrent DNA] "C:\Program Files\DNA\btdna.exe"
O4 - HKCU\..\Run: [SpybotSD TeaTimer] C:\Program Files\Spybot - Search & Destroy\TeaTimer.exe
O8 - Extra context menu item: &D&ownload &with BitComet - res://C:\Program Files\BitComet\BitComet.exe/AddLink.htm
O8 - Extra context menu item: &D&ownload all video with BitComet - res://C:\Program Files\BitComet\BitComet.exe/AddVideo.htm
O8 - Extra context menu item: &D&ownload all with BitComet - res://C:\Program Files\BitComet\BitComet.exe/AddAllLink.htm
O8 - Extra context menu item: E&xport to Microsoft Excel - res://C:\PROGRA~1\MICROS~2\OFFICE11\EXCEL.EXE/3000
O9 - Extra button: Research - {92780B25-18CC-41C8-B9BE-3C9C571A8263} - C:\PROGRA~1\MICROS~2\OFFICE11\REFIEBAR.DLL
O9 - Extra button: BitComet - {D18A0B52-D63C-4ed0-AFC6-C1E3DC1AF43A} - res://C:\Program Files\BitComet\tools\BitCometBHO_1.2.8.7.dll/206 (file missing)
O9 - Extra button: (no name) - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O9 - Extra 'Tools' menuitem: Spybot - Search & Destroy Configuration - {DFB852A3-47F8-48C4-A200-58CAB36FD2A2} - C:\PROGRA~1\SPYBOT~1\SDHelper.dll
O11 - Options group: [INTERNATIONAL] International*
O16 - DPF: {6E32070A-766D-4EE6-879C-DC1FA91D2FC3} (MUWebControl Class) - http://update.microsoft.com/microsoftupdate/v6/V5Controls/en/x86/client/muweb_site.cab?1222196752312
O17 - HKLM\System\CCS\Services\Tcpip\..\{81506689-1362-46BD-99A7-0FC5B2284A2D}: NameServer = 85.255.112.10;85.255.112.103
O17 - HKLM\System\CCS\Services\Tcpip\..\{EC18E341-7B60-4719-B87D-D12F6C3413B2}: NameServer = 208.67.222.222 208.67.220.220
O18 - Protocol: livecall - {828030A1-22C1-4009-854F-8E305202313F} - C:\PROGRA~1\Windows Live\Messenger\msgrapp.8.5.1302.1018.dll
O18 - Protocol: msnim - {828030A1-22C1-4009-854F-8E305202313F} - C:\PROGRA~1\Windows Live\Messenger\msgrapp.8.5.1302.1018.dll
O18 - Protocol: skype4com - {FFC8B962-9B40-4DFF-9458-1830C7DD7F5D} - C:\PROGRA~1\COMMON~1\Skype\SKYPE4~1.DLL
O20 - Winlogon Notify: igfxcui - C:\WINDOWS\SYSTEM32\igfxdev.dll
O20 - Winlogon Notify: WgaLogon - C:\WINDOWS\SYSTEM32\WgaLogon.dll
O21 - SSODL: WPDShServiceObj - {AAA288BA-9A4C-45B0-95D7-94D524869DB5} - C:\WINDOWS\system32\WPDShServiceObj.dll
O23 - Service: Lavasoft Ad-Aware Service (aawservice) - Lavasoft - C:\Program Files\Lavasoft\Ad-Aware\aawservice.exe
O23 - Service: Adobe LM Service - Unknown owner - C:\Program Files\Common Files\Adobe Systems Shared\Service\Adobelmsvc.exe
O23 - Service: Eset HTTP Server (EhttpSrv) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\EHttpSrv.exe
O23 - Service: Eset Service (ekrn) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\ekrn.exe
O23 - Service: Java Quick Starter (JavaQuickStarterService) - Unknown owner - C:\Program Files\Java\jre6\bin\jqs.exe" -service -config "C:\Program Files\Java\jre6\lib\deploy\jqs\jqs.conf (file missing)
O23 - Service: Kerio Personal Firewall (PersFw) - Kerio Technologies - C:\Program Files\Kerio\Personal Firewall\persfw.exe
O23 - Service: TuneUp Drive Defrag Service (TuneUp.Defrag) - TuneUp Software GmbH - C:\WINDOWS\System32\TuneUpDefragService.exe


i just rescan with HJT.. it seems dont effect anything.. if this this problem cant fix. never mind maybe when the time comes. the time that format pc is a must. then it will solve the problem.. i just cant see the signal strength thats all.. not a big problem.. anyways thnx for the tips and help it mean a lot to me.. if u got any suggestion just tell me.. i will try it.. thnx bro u helped me alot :)

-Hazeem-

Anonymous Says :
November 24, 2008 at 6:23 PM

regcure always be my registry fix. i tried all the steps. it dosent work. maybe my modem have some error when plug in the pc.. but its ok.. better than cant connect the internet. i believe if i format the windows sure it will help.. haha.. (last resort)

Anonymous Says :
November 24, 2008 at 6:45 PM

greetings napster... here's my TCP/IP analyzer:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.24.2008 05:10
IP address: 219.93.xxx.xx

TCP options string: 020405780103030201010402
MSS: 1400
MTU: 1440
TCP Window: 16800 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 4200
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 672kbps (84KBytes/s)
BDP limit (500ms): 269kbps (34KBytes/s)
MTU Discovery: ON
TTL: 111
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)


Can I change MTU valu to 1500? can teach me..? speedguide forum didn't help me at ol but it will be a great help if u can teach me...?
btw, im using Vista SP1, latest firmware and dashboard just like u but it's still slow.. my speed test result about 800kbps (Server Penang)... advanced package...

=dreamblaster=

Anonymous Says :
November 24, 2008 at 7:42 PM

Using Kaspersky?
Seems your kaspersky has block your RWIN.

How to unblock port on kaspersky? Ok here the descripton;
1.open kaspersky > setting > Traffic monitoring > Port settings > uncheck General HTTP 8080 > ok
2. Post a new TCP Analyzer report after port open.

sorry i'm late reply 2 u, thiz is my new report after open the port

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.24.2008 06:41
IP address: 219.93.xxx.xx

TCP options string: 020405b4
MSS: 1460
MTU: 1500
TCP Window: 17520 (multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 17520
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 701kbps (88KBytes/s)
BDP limit (500ms): 280kbps (35KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: OFF
IP ToS: 00000000 (0)

Anonymous Says :
November 24, 2008 at 11:47 PM

Hello Hazeem,
The tips above just to make sure you have a clean pc, now its clean...hehehe...lol...try a solution below,
1. Download from Microsoft Website new version => Microsoft Visual C++ 2008 Redistribution Package (x86).

2. You need to reinstall Microsoft Windows Script. Click the link for Microsoft Windows Script 5.7 for your version of Windows,
http://www.microsoft.com/downloads/details.aspx?FamilyID=47809025-d896-482e-a0d6-524e7e844d81&DisplayLang=en

3. Reinstall or update DirectX

-Go to the Microsoft Web site.
http://www.microsoft.com/windows/directx/default.aspx?url=/windows/directx/downloads/default.htm
-Click the link to download the current version of DirectX.
-For more information, read How to Download and Install DirectX.
http://support.microsoft.com/default.aspx?kbid=179113&product=drx
-Run the file Dxwebsetup.exe.
-The download process for DirectX begins.
-After the download and the installation have finished, restart the computer.

4. -Klik 'Start', pilih 'Control Panel'.
-Klik 2 kali 'Internet Options'.
-Klik 'Advance'.
-Cari "Disable Script debugging', unselect box.
-Cari "Display a notification about every script error", unselect box.

5. Download driver from http://www.bluecube.com.my,
http://bluecube.com.my/uploadfile/Drivers/Windows.rar

Hope it works.

Anonymous Says :
November 24, 2008 at 11:47 PM

Actually Im not using kasperky...
Im used mcafee total protection
Im currently set autotuning:

netsh interface tcp set global autotuninglevel=highlyrestricted

My question:
1.which autotuninglevel I should set?
2.How to unblock RWIN such like unblock port General HTTP8080...?

it will be great help if u can tell step by step...

btw, here's my latest SpeedGuide.net TCP/IP Analyzer:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.24.2008 10:42
IP address: 219.93.xxx.xx

TCP options string: 0204057801010402
MSS: 1400
MTU: 1440
TCP Window: 16800 (multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 16800
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 672kbps (84KBytes/s)
BDP limit (500ms): 269kbps (34KBytes/s)
MTU Discovery: ON
TTL: 111
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

=dreamblaster=

Anonymous Says :
November 24, 2008 at 11:49 PM

Actually Im not using kasperky...
Im used mcafee total protection
Im currently set autotuning:

netsh interface tcp set global autotuninglevel=highlyrestricted

My question:
1.which autotuninglevel I should set?
2.How to unblock RWIN such like unblock port General HTTP8080...?

it will be great help if u can tell step by step...

btw, here's my latest SpeedGuide.net TCP/IP Analyzer:

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.24.2008 10:42
IP address: 219.93.xxx.xx

TCP options string: 0204057801010402
MSS: 1400
MTU: 1440
TCP Window: 16800 (multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 16800
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 672kbps (84KBytes/s)
BDP limit (500ms): 269kbps (34KBytes/s)
MTU Discovery: ON
TTL: 111
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

=dreamblaster=

Anonymous Says :
November 25, 2008 at 12:17 AM

Hello dreamblaster,
1. Your Vista's auto-tuning function has been disabled. Go to start-run paste this " netsh int tcp set global autotuninglevel=normal " and hit enter. Reboot comp. Do another TCP Analyzer. RWIN scaling should not be zero when auto-tuning is enabled. That's all.

2. see Philip's article on Windows Vista Tweaks:
http://www.speedguide.net/read_articles.php?id=2574

Open command prompt and run netsh int tcp show global and copy/post results.

This is what I get, yours should be similar.
C:\Users\nApStEr>netsh int tcp show global
Querying active state...

TCP Global Parameters
----------------------------------------------
Receive-Side Scaling State : enabled
Chimney Offload State : disabled
Receive Window Auto-Tuning Level : normal
Add-On Congestion Control Provider : ctcp ( may be none)
ECN Capability : disabled
RFC 1323 Timestamps : disabled

3. MTU limited by this USB modem. Perhaps MTU can be increased using a router instead, and the router will also provide a hardware firewall through its NAT function. See this:

http://www.vigsys.net/HWGR2.html?gcl...FQwZegod1nvXiQ

Anonymous Says :
November 25, 2008 at 12:25 AM

For your info dreamblaster, Vista with auto-tuning enabled usually gives a TCP Window that is just above 65535, RWIN scaling is turned on and Unscaled RWIN a low value. When auto-tuning is disabled, RWIN scaling is zero and TCP Window will be 64240 or lower.

Anonymous Says :
November 25, 2008 at 12:35 AM

Hello mosaih, try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU - 1500
TTL - 64
TCP Receive Window - 256960
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - checked
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 1
Host Priority - 1
DNSPriority - 1
NetbtPriority - 1
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 0
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.
*When correctly done, TCP Window should become 256960.

Anonymous Says :
November 25, 2008 at 3:23 AM

helo napster....

aku igt nak beli router sebijik ar.senang skit kalu adik2 aku nk maen tenet.xyah asyik cucuk cabut je modem usb ni.aku kalu bleh nk router yg support hspda,3g,umts,edge,gprs sume2 2 ar.pastu speed up to 7.2Mbps.pas2 interface dia ethernet and wireless.ada jual x router jenih 2???brand ape yg elok,baguih,sempoi & terbaik???

ape komen ko napster???

-texas5-

Anonymous Says :
November 25, 2008 at 3:26 AM

heres my latest result after I hv set
"netsh interface tcp set global autotuninglevel=highlyrestricted" into
"netsh int tcp set global autotuninglevel=normal"

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.24.2008 14:11
IP address: 219.93.xxx.xx

TCP options string: 020405780103030201010402
MSS: 1400
MTU: 1440
TCP Window: 16800 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 4200
Recommended RWINs: 64400, 128800, 257600, 515200, 1030400
BDP limit (200ms): 672kbps (84KBytes/s)
BDP limit (500ms): 269kbps (34KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

I'm a lil bit 'argue' with this result when changed it into normal... with this result am I reached the finest speed? Did u have any other suggestions? i'm followin' all the instructions from Philip's article on Windows Vista Tweaks:
http://www.speedguide.net/read_articles.php?id=2574. FYI napster, I'm just downloadin' Vista tcpip.sys and UAC Auto Patcher v2.2 since Im using Vista SP1 from this link:
http://www.mydigitallife.info/2008/02/17/download-vista-tcpipsys-and-uac-auto-patcher-to-increase-tcp-connection-limit/

Did u think think this patch is worth downloadin' since my BitComet download so slow? I already install this patch and have no problem with it but im not sure it is worth or not... that all

=dreamblaster=

Anonymous Says :
November 25, 2008 at 3:49 AM

helo texas5,

Kalau ko nak jenis tue...bagi aku ikut dari kos gak arr...
1. Aku cadangkan ko beli router wireless jenis D-Link DIR 300 Wireless G Router...Harganya berpatutan, dalam lebih kurang RM 120 kat PC Depot, Ipoh, kalau kat kedai-kedai di Yik Foong, model yang sama dia jual RM 165.
2. Kalau ko nak yg high kualitinyer ko leh beli VigSys Wireless Data Gateway VR20...Harganya dalam RM 2 ribu lebih gak la...Tapi aku target yang nie...hu3..Nak lebih info gie kat link nie>>
http://www.vigsys.net/HWGR2.html?gcl...FQwZegod1nvXiQ

Anonymous Says :
November 25, 2008 at 4:12 AM

For dreamblaster,
1. Open command prompt and run netsh int tcp show global and copy/post results here.
2. This patch is used when TCP/IP Limit is blocked on your BitComet...Its worth when you cannot set New Half-Open Limit on your BitComet then for those reason this patch play the function and give you space to set New Half-Open Limit on BitComet..Anyway if your BitComet can set New Half-Open Limit, don't bother to tryin use a third party like this patch.


To speed up your bitcomet, setting your bitcomet to limit.(This setting for celcom broadband user like us and already calculate by me)..
1. Open BitComet 1.0X, go to connection, global max upload rate set to 10.
2. Listen port, set to 60000 until 65528, you can choose.
3. On Port mapping uncheck all
4. Go to Advanced, click bittorent.max_connection _per_task set to 80, click network.max_connections set to 134
5. TCP IP limit set to 200.(If you cannot set this on BitComet try use a third party like patch)
6. Reboot your pc.
7. Now...after you set a limit on bitcomet you suppost get about 100kbps or plus download rate.
Then ignore the yellow thingy on bitcomet.

Anonymous Says :
November 25, 2008 at 4:13 AM

huahuahua.nak haram...2 ribu lebih.gila kot.hehehe.tp mesti mantap pnya performance.xkn putuih2 connection dia.ang bior bebenor napster...bank mana ang nk rompak???ajak aku skali.hohoho.niway,thnx 4 da information.kompem ekk harge kt pc depot rm120...esok jgk aku g rembat...

Anonymous Says :
November 25, 2008 at 4:37 AM

Heheheh...Harga dia aku memang da confirm RM120 @ RM125, ko leh tengok or download pricelist kat web site dorang untuk kepastian,
http://www.pcdepot.com.my/pricelist.aspx

Anonymous Says :
November 25, 2008 at 4:46 AM

thx mate... Im already follow ur instructions for BitComet setting...
Huzzaah.... it boost up about 200kbps... maybe leech from a great torrent i guess.. hehe~
nway, thx again... my connection a bit improved than before :))

Anonymous Says :
November 25, 2008 at 4:51 AM

thx mate... Im already follow ur instructions for BitComet setting...
Huzzaah.... it boost up about 200kbps... maybe leech from a great torrent i guess.. hehe~
nway, thx again... my connection a bit improved than before :))

=dreamblaster=

Anonymous Says :
November 25, 2008 at 4:59 AM

I'm glad that your speed has been increased...Anyway, before you download file torrent from torrent site, always remember, make sure that torrent file must have 200 or plus seeder and a little leecher...

Anonymous Says :
November 25, 2008 at 9:44 PM

seems same ...

network adapter selection - nothing in the list to select


« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.25.2008 08:41
IP address: 219.93.xxx.xx

TCP options string: 020405b4
MSS: 1460
MTU: 1500
TCP Window: 17520 (multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 17520
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 701kbps (88KBytes/s)
BDP limit (500ms): 280kbps (35KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: OFF
IP ToS: 00000000 (0)

Anonymous Says :
November 25, 2008 at 11:18 PM

this my latest report... i got tcp windows 256960 but the speed become lower ...at 60kbps only ...whyaaa..

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.25.2008 10:13
IP address: 219.93.xxx.xx

TCP options string: 020405b40103030201010402
MSS: 1460
MTU: 1500
TCP Window: 256960 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64240
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 10278kbps (1285KBytes/s)
BDP limit (500ms): 4111kbps (514KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

Anonymous Says :
November 25, 2008 at 11:39 PM

but my tcp windows keep changing between 256960 and 32768

Anonymous Says :
November 26, 2008 at 12:37 AM

naps.. it doesnt work.. well its ok.. i have a few questions.. if i change the modem cable.. it will effect the speed??
because i tried change my cable to "canon" camera cable. it work fine but the speed decreasing i dont know if it only coincidence. i tried use it because it is longer than the real cable.. i also noticed the camera cable is thinner or smaller diameter than the real cable.. is the smaller diameter and the longer cable effect the speed?? technically ?? just asking thnx....

-Hazeem-

Anonymous Says :
November 26, 2008 at 12:57 AM

Hye mosaih,
1. Ignore the network adapter selection becoze no option for usb modem, for this reason just select Modify All Network Adapters...

2. Your MTU have 1500, u can try do a experiment to change your TCP Window between 64240, 128480, 256960 and see the different result which one get better/higher speed and suitable for your broadband...

3. If option no 2 non works, high recomended clean your pc from any virus, spyware, adware and etc. I believe if you get low download speed must be malware going to work on your computer currently.

4. If your TCP Windows keep changing between 256960 and (32768)...

Try to unblock again,
1.open kaspersky > setting > Traffic monitoring > Port settings > uncheck General HTTP 8080 > ok......

This happen because your antivirus have a internal error and keep blocking, monitoring this port. Try uninstall this antivirus, do a scan for malware (Use Ad-Aware and update definition), after fix install back antivirus.

Anonymous Says :
November 26, 2008 at 2:48 AM

Hello Hazeem,
1. Your speed is decreasing due using a smaller and thinner diameter camera cable (canon)...This happen because each one cable have a own class codes and recomended device to connect it. USB cable defines class codes used to identify a device’s functionality and to load a device driver based on that functionality. This enables a device driver writer to support devices from different manufacturers that comply with a given class code. For example digital camera have 06h class code and for modem 02h class code.

2. Just for info,
(USB signaling)USB supports three data rates:


* The Full Speed rate of 12 Mbit/s (1.5 MB/s) is the basic USB data rate defined by USB 1.0. All USB hubs support Full Speed.

* A Low Speed rate of 1.5 Mbit/s (187.5 kB/s) is also defined by USB 1.0. It is very similar to full speed operation except that each bit takes 8 times as long to transmit. It is intended primarily to save cost in low-bandwidth Human Interface Devices (HID) such as keyboards, mice, and joysticks.

* A High-Speed (USB 2.0) rate of 480 Mbit/s (60 MB/s) was introduced in 2001. All high-speed devices are capable of falling back to full-speed operation if necessary.


Experimental data rate:


* A Super-Speed (USB 3.0) rate of 4.8 Gbit/s (600 MB/s). The USB 3.0 specification was released by Intel and its partners in August 2008, according to early reports from CNET news. Products using the 3.0 specification are likely to arrive in 2009 or 2010.

3. I use a AA1FT-B 28/24AWG USB Shielded High Speed Cable 2.0 Revision 28AWG/1P+24AWG/2C AWM 2725 80c 30V VW-1 and its very suitable for my HUAWEI E220 modem to speed up trasmitted data and decreased a triboelectric effect. For details about this cable go here>>
http://www.usb-cable.com/usb-extension-cables.html

Anonymous Says :
November 26, 2008 at 2:57 AM

If you want buy this cable, try find this code
(USB Shielded High Speed Cable 2.0 Revision 28AWG/1P+24AWG/2C) on cable surface.

Anonymous Says :
November 26, 2008 at 12:32 PM

omg naps... can u tell me what you dont know about computer??
haha by the way, thanks a lot i will find the cable..

-Hazeem-

Anonymous Says :
November 26, 2008 at 8:19 PM

bro naps,
this is Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 8:12:57 PM, on 11/26/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe
C:\Program Files\Intel\Wireless\Bin\ZcfgSvc.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\spoolsv.exe
C:\Program Files\Intel\Wireless\Bin\OProtSvc.exe
C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
C:\WINDOWS\ATK0100\HControl.exe
C:\WINDOWS\system32\igfxtray.exe
C:\WINDOWS\system32\hkcmd.exe
C:\WINDOWS\system32\igfxpers.exe
C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe
C:\Program Files\Intel\Wireless\Bin\EOUWiz.exe
C:\WINDOWS\SOUNDMAN.EXE
C:\WINDOWS\ALCMTR.EXE
C:\Program Files\ASUSTeK\ASUSDVD\PDVDServ.exe
C:\Program Files\Common Files\InstallShield\UpdateService\ISUSPM.exe
C:\Program Files\Vodafone\Vodafone Mobile Connect\Bin\MobileConnect.EXE
C:\WINDOWS\system32\wscntfy.exe
C:\PROGRA~1\Intel\Wireless\Bin\1XConfig.exe
C:\WINDOWS\ATK0100\ATKOSD.exe
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Yahoo!\Messenger\YahooMessenger.exe
C:\Program Files\Trend Micro\HijackThis\HijackThis.exe

R3 - URLSearchHook: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\PROGRA~1\Yahoo!\Companion\Installs\cpn\yt.dll
O2 - BHO: &Yahoo! Toolbar Helper - {02478D38-C3F9-4efb-9B51-7695ECA05670} - C:\PROGRA~1\Yahoo!\Companion\Installs\cpn\yt.dll
O2 - BHO: Adobe PDF Reader Link Helper - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:\Program Files\Common Files\Adobe\Acrobat\ActiveX\AcroIEHelper.dll
O2 - BHO: Yahoo! IE Services Button - {5BAB4B5B-68BC-4B02-94D6-2FC0DE4A7897} - C:\Program Files\Yahoo!\Common\yiesrvc.dll
O3 - Toolbar: Yahoo! Toolbar - {EF99BD32-C1FB-11D2-892F-0090271D4F88} - C:\PROGRA~1\Yahoo!\Companion\Installs\cpn\yt.dll
O4 - HKLM\..\Run: [HControl] C:\WINDOWS\ATK0100\HControl.exe
O4 - HKLM\..\Run: [IgfxTray] C:\WINDOWS\system32\igfxtray.exe
O4 - HKLM\..\Run: [HotKeysCmds] C:\WINDOWS\system32\hkcmd.exe
O4 - HKLM\..\Run: [Persistence] C:\WINDOWS\system32\igfxpers.exe
O4 - HKLM\..\Run: [SynTPLpr] C:\Program Files\Synaptics\SynTP\SynTPLpr.exe
O4 - HKLM\..\Run: [SynTPEnh] C:\Program Files\Synaptics\SynTP\SynTPEnh.exe
O4 - HKLM\..\Run: [IntelWireless] C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe /tf Intel PROSet/Wireless
O4 - HKLM\..\Run: [EOUApp] C:\Program Files\Intel\Wireless\Bin\EOUWiz.exe
O4 - HKLM\..\Run: [SoundMan] SOUNDMAN.EXE
O4 - HKLM\..\Run: [AlcWzrd] ALCWZRD.EXE
O4 - HKLM\..\Run: [Alcmtr] ALCMTR.EXE
O4 - HKLM\..\Run: [RemoteControl] "C:\Program Files\ASUSTeK\ASUSDVD\PDVDServ.exe"
O4 - HKLM\..\Run: [Adobe Reader Speed Launcher] "C:\Program Files\Adobe\Reader 8.0\Reader\Reader_sl.exe"
O4 - HKCU\..\Run: [ISUSPM] "C:\Program Files\Common Files\InstallShield\UpdateService\ISUSPM.exe" -scheduler
O4 - HKCU\..\Run: [MobileConnect.EXE] C:\Program Files\Vodafone\Vodafone Mobile Connect\Bin\MobileConnect.EXE
O4 - HKCU\..\Run: [Yahoo! Pager] "C:\Program Files\Yahoo!\Messenger\YahooMessenger.exe" -quiet
O9 - Extra button: Yahoo! Services - {5BAB4B5B-68BC-4B02-94D6-2FC0DE4A7897} - C:\Program Files\Yahoo!\Common\yiesrvc.dll
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:\Program Files\Messenger\msmsgs.exe
O16 - DPF: {30528230-99f7-4bb4-88d8-fa1d4f56a2ab} (Installation Support) - C:\Program Files\Yahoo!\Common\Yinsthelper.dll
O23 - Service: EvtEng - Intel Corporation - C:\Program Files\Intel\Wireless\Bin\EvtEng.exe
O23 - Service: OwnershipProtocol - Intel Corporation - C:\Program Files\Intel\Wireless\Bin\OProtSvc.exe
O23 - Service: RegSrvc - Intel Corporation - C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe
O23 - Service: Spectrum24 Event Monitor (S24EventMonitor) - Intel Corporation - C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe

--
End of file - 4357 bytes

u ask me to do this last week but i kind of bz and today i give u this..
please help me..
-arn-

Anonymous Says :
November 27, 2008 at 1:05 AM

Hello arn,
What modem you currently used?

Anonymous Says :
November 27, 2008 at 8:23 PM

helo bro naps,

aku tngk kt total volume statistic dah 5.1GB ni.ape jd kalu dah lebih 5GB ni.aku ade dgr jgk pasal celcom limit 5GB.ko pnya cmna????

-texas5-

Anonymous Says :
November 28, 2008 at 6:56 AM

Hello texas5,
Skang aku ngah online dalam O2 aku so x byk yg leh aku taip coz skang nih aku ader kat luar negeri, kind a busy now days, kene tido awal...hu3, Hmmm...yang betul-betul limit tue apabila kiter dapat mesej dari Celcom melalui software dashborad....So kalau x dapat aper2 mesej lagi kira dia tak potong lagi bandwitdh kelajuan kiter (speed akan menurun)...Celcom nyer policy 5GB per month usage. Policy ni akan apply kalau ade network congestion hour and kat certain tempat jer....skang aku pakai x nah lagi kene capp...walaupun kat volume statistic aku mencapai 800GB dalam sebulan (coz aku kaki torrentz...hahaha)...Aktiviti2 menorent nie sebenarnyer amatlah tidak digemari oleh celcom mahupun streamyz coz kalau ramai yg buat aktiviti seumpama ini network akan jadi sempit/busy/high traffic/peak pastue jadi slow (apabila kiter download torrent, mesti network connection kiter sentiasa sent n received)...then barulah byk complain dari user2 yg lain cakap network dorang slow....so oleh sebab itu wujudlah Celcom nyer policy 5GB per month usage. Begitulah ceriternyer..Jadik kiter kene lah wat kempen anti torrent kalau nak kelajuan internet kiter kat malaysia nih laju...ps* weh..leh ker aku wat camtue...hahaha

Anonymous Says :
November 28, 2008 at 3:40 PM

wahaha...aku mangsa rupanya...sbb aku x penah torrent menorrent nie.gila ang...smpai 800GB dah...ish2...ape2 hal thanx bro naps...

Anonymous Says :
December 1, 2008 at 9:45 PM

hello there new here, i posted the same at Celcom Broadband Thread but didnt seem to get any response so i posted here, im a new celcom broadband user and usually i use the streamyx fixed line package with the speed of 1.0MBPS but since i am traveling a lot right now. East to West Malaysia and back to west malaysia. I register with the Celcom Broadband since i get a lot of good comment on it from my friends.

But after using it for like 2 weeks, i was unable to download my torrent file which is mainly music video and photograph album of scenery. Is it because of the broadband or do i have to tweak my connection for torrent? Im using BITCOMET btw.

Also i am not able to download from Rapidshare and Megaupload, Why is that? i get the message my download limit exceed and i downloaded a file which i dont.


There are also certain website i wasnt able to get into such as Gamefaqs.com and Gamespot.com. Sometimes I can only enter it during the late night here at Sabah. Why is that?

Also im using the default modem by celcom and using the package that paid rm98. Should i change the modem to get a much better connection speed? Is there any recommendation of what type of modem i should be using to boost my speed? And where can i buy it at KL? Any other stuff should i buy to boost the connection speed? Im currently using it on my laptop.

my modem is E220 USB MODEM.

Im sorry to trouble you guys but i have been to many websites already researching to boost my connection and get something better out of it. So any comment would be appreciated and thank you for taking your time to read this.

p/s: Currently in Sabah but will go back to Shah Alam around end of December.

p/s: Just discovered that i cant log into my MIRC. Why is that?

Is there anyway to contact you? i have lots of question to ask about celcom broadband... sorry to trouble you a lot.

Anonymous Says :
December 1, 2008 at 10:06 PM

hello there siggymas..
yeah like u said, celcom cant download from rapidshare and megaupload because they have the same ip with others if im not mistaken.. i also have the same problem with the gamefaqs website. but sometimes i cleared the cookies in firefox then i can go to the site.. but last time.. about 3 months ago. i barely can download from rapidshare.. i dont know. i just can.. but now 100% cant download from that website.

about mirc i can use it even can download from it and also can log in with telnet. i dont know why u cant log into mirc..but im sure NAPSTER can help u.. he help me alot in here.. about speed u just ask napster to tweak the broadband TCP.. btw i can do torrent my plan is D68 and using bluecube modem (i prefer your modem but my father who the 1 buy the modem and the plan, i just use them hahha)

ok thnx..
-Hazeem-

Anonymous Says :
December 1, 2008 at 10:11 PM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.01.2008 08:52
IP address: 219.93.xxx.xxx

TCP options string: 020405b401010402
MSS: 1460
MTU: 1500
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 112
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)

Windows XP Service Pack 3 - Laptop
Area: Sabah but will go back to shah alam around end of december.

Me again lol.
My celcom broadband package is the RM98 up to 3.6MBPS, i cant seems to find your package which is up to 7.2MPBS.. weird... even when i check the celcom broadband website because i plan to upgrade like yours if it can be upgrade.

Anonymous Says :
December 1, 2008 at 10:18 PM

Hazeem, thanks for the reply!!! the reason i want mirc to be able to work is because i want to download from it also... do you use any special program to go into mirc??? i just use a normal MIRC.

Anonymous Says :
December 1, 2008 at 10:56 PM

last before going to sleep!!!

how do i update my Huawei firmware and dashboard from here http://www.huawei.com/mobileweb/en/doc/list.do?type=-1&id=736 which one do i choose?

and my version is HOSTB81.11.107.02.00.91, is it latest?

Is changing the cable really effect the speed??

I already tweak my firefox but my version of firefox is 2.0.0.18 and is it compatible with fasterfox???

sorry again if i disturb you with this noobish question, i really want to have a good connection so i can go MIRC and download and watching heroes season 3 on streaming or atleast download it.

Sorry again. thank you for taking your time to read my comment. really appreciate it!!!

Anonymous Says :
December 2, 2008 at 2:40 AM

hi siggymas again.. hehe
im using D68. of course my speed only can support 384k maximum... im satisfied with my speed because i can get about 90-95% what celcom give me with only UTMS(3G), because at my place kinda hard to get HSDPA(3.5G) it is better for me to use the D68. plan D98 like yours and other can support up to 3.6mbps if u got the HSDPA(3.5G)which is not all place covered, if im not mistaken the nearer u at celcom tower the easier u get the signal(its obvious logically).. some people said 1 celcom tower can provide few HSDPA access to user. Thats mean if u near celcom tower u will get the better chance to get HSDPA.. u can ask Napster for more information, i only heard from other ppl, so my information not very accurate.. btw celcom only got D68(384kbps) and D98(3.6mbps) only the HSDPA(3.5G) modem that we use can support maximum speed 7.2mbps. i heard about izzi new internet broadband, 4G but never see people use it.

about the firmware u can see the comment above.. and u can ask napster when he is online. because im using bluecube modem also can support max 7.2mbps..

the cable can effect the speed.. u can see the comment above.. if u want to change the cable.. make sure your cable can support the speed and the transmitted data u can ask napster later, he the 1 who tell me about the cable.. my experience when i use smaller diameter my torrent download speed is half the speed when is the normal cable. i cant be sure if there are coincidence in it.but when i change back the normal cable my download speed is normal like before.

i only use the normal mirc.. if u try to go in mirc via telnet is hard to use it. i just try it for fun.. i seldomly download from mirc because my internet speed for direct download is not fast enough. i prefer to use torrent. but not all the time torrent only in tuesday and firday and sometimes if i want to watch movie or downloading software. i think u have problem to download from torrent because of the tracker or seeder...

fasterfox is 100% works on firefox 2..i used them when im using firefox 2 last time before i upgraded to 3, but now there is the way to change the fasterfox version to make it compatible with firefox 3. i forgot where i saw the tweak.. but i tweak my firefox 3 in "about:config".. im very sure u can find the tweak post in this blog.

dont worry there is no such a noobish question. i suggest u use the torrent to download heroes season 3. u can download it in mininova.org , i always download a good torrent there.. u can tweak your bitcomet to the maximum speed just follow the comments above.. i got my bitcomet download speed 40k and above average if the seeder are greater than 200 and the small amout of leecher.. and i still can surf the net nicely.. btw i also watch heroes season 3 hahaha starting monday night to tuesday eztv will be upload the torrent. the video quality is the best, like u watch it on tv.. u also can find the subtitle for it..
p/s: software in mininova are nice too and where is NAPSTER.. he so buzy.. i also have a question about my tracert to him
p/s: i also continue my further study in shah alam year 2009 in january. i stay in KL now.

thx again..
-Hazeem-

Anonymous Says :
December 2, 2008 at 2:44 AM

Hello siggymas...
First...now i will begin give you step by step...lets do a tweaking...
1. Download, update and scan with SpyBot S&D & Ad-aware to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. Spyware can and will ruin your connection and crash your pc!

3. Tweaks for firefox >>
http://amenapster.blogspot.com/2008/09/make-firefox-browser-run-at-full-speed.html also use fasterfox.(fasterfox only compatible for firefox version 2, but have a mod by another person to running on firefox 3 also)

4. Gpedit tips >>
http://amenapster.blogspot.com/2008/09/how-to-speed-up-your-broadband-internet.html

5. Use a Ccleaner to clean your pc >> http://www.filehippo.com/ (Browse for Ccleaner then download)

6. Download TCP Optimizer >> (after do a TCP/IP Analyzer, post here and i can calculate proper setting for you)
http://amenapster.blogspot.com/search/label/speed%20up%20connection

7. High recomended clean your pc from any virus, spyware, adware and etc.

8. Do all tip above and we will continue with another tips.

Anonymous Says :
December 2, 2008 at 7:56 PM

hey there @napster and @Hazeem, just read yours comment will do that ASAP!!! Thanks for the great INF0 and tip!!! Im using the office internet connection (im an OL lolz) so will be doing your steps when i get home to my laptop!!! Byez...

-Thanks!-

Anonymous Says :
December 2, 2008 at 7:59 PM

p/s: My laptop have already been reformatted two days ago, and it is still clean... i think, but will scan it just in case!!

Anonymous Says :
December 2, 2008 at 8:46 PM

hello there.. a format. sure a clean laptop u have.. hehe im downloading heroes right now. just want tell about it.. napster.. can i ask about my tracert?? i will post the tracert here.. it is normal or not?? because obviously i can get only 1 route responded.. kinda pathethic..

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Hazeem>tracert www.yahoo.com

Tracing route to www-real.wa1.b.yahoo.com [209.131.36.15
over a maximum of 30 hops:

1 1843 ms 1656 ms 1728 ms 10.221.27.7
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.

Trace complete.

i put my modem under my desk due the short cable that bluecube gave me. i cant afford to buy new 1 now.. but there is no such electrical device near my modem. my motherboard only have 2 usb port and unfortunately both of them at the back.. kinda old skool system i got by the way my processor only pentium 4 1.8ghz. if u figured out something, hit me ok napster.. thnx for everything bro...

-Hazeem-

Anonymous Says :
December 3, 2008 at 12:25 AM

halu, i got the link here from a forum, you see im using a celcom broadband. the thing is... I GOT BANNED FROM MIRC NETWORK!!! server is IRC-HIGHWAY, i got the message i was K-LINED so suddenly and then got banned!!

i just want to ask is it because im using the broadband??? anyone else have this problem?

i knew it having this broadband is too good to be true... crap i miss my fixed line streamyx

Anonymous Says :
December 3, 2008 at 12:46 AM

Hello Hazeem,
1. it's nothing to do about tracert on broadband because celcom coverage via mobile service use a ip sharing on network...
2. After all, just make sure your modem is placed a few feet away from all other electrical devices to avoid signal quality disturbed and always remember that's the nature of an internet connection over a mobile phone line. Much depends on your distant and clear line of sight to the cell tower and the clarity of the airwave.

Anonymous Says :
December 3, 2008 at 1:20 AM

and it does not have a built-in router instead...
3. Just keep it clean your pc and use a tips suggest by me.

Anonymous Says :
December 3, 2008 at 1:41 AM

Heya! back here! i just finished downloading the all of your recommended anti-virus program( it took me around 4 hours) and starting to scan it right now...

For Anonymous about the MIRC, K-Lined means that your network have been banned not you it is because our celcom broadband is a sharing network. THEREFORE, anyone got the K-lined will affect everyone else. Whether its permanent or not im not sure but i heard its not permanent you just have to wait until ban expired.

I knew about this is because i just recently get banned also on your server.... lolz

Anonymous Says :
December 3, 2008 at 1:47 AM

Ok...il'be waiting for the result..

Anonymous Says :
December 3, 2008 at 3:23 AM

thnx napster.. tracert really freak me out at the first time..

i heard izzi 4g only works around klang valley area.. kinda nice because their line are very stable and they said "our network will find u not like others which is you searching for network" so because of that when we using the same bandwidth like other people for example: 5 people using 1mbps, they will avoid being slowed down by other users with the same bandwidth(5mhz of spectrum).. near my place can see all the banner and the promotion about w1max and izzi.. maybe my area can get full data access.. kinda cool, unfortunately i cant use the same modem haha... just telling the infomation..

-Hazeem-

Anonymous Says :
December 3, 2008 at 4:04 AM

Hello Hazeem,
Seems i hear so many complain about this stuff..tryin google and found that before you sign up...hu3

Anonymous Says :
December 3, 2008 at 4:14 AM

And have this (TERMINATE A CUSTOMER) on their T&Cs and read the T&Cs of service closely. It's available here ---> http://izzi.com.my/terms_condition.php

In particular, clause 10.6:

iZZinet reserves the right to suspend or terminate a Customer who consistently uses the Service to download or upload extremely high volume/content/traffic data. For the avoidance of doubt, the Service is not designed for consistent or extremely heavy users, particularly using peer-to-peer applications constantly or consistent use of any other applications that will have a detrimental effect to iZZinet Network's performance and that of other users' use of the Service.

Anonymous Says :
December 3, 2008 at 10:47 AM

hahahaha.. u damn right napster.. what is the world without p2p.. they want to prevent the same thing what celcom did... if we cant use p2p then if we want to download stuff just direct download ??? that is no fun. they make people life harder. uhuhuhuu

Anonymous Says :
December 3, 2008 at 4:00 PM

Salam..napster ..sya baru bli celcom bb package d68 n usb huawei e220 ..saya ada terbaca tentang tweak untuk increased broadband speed...how to do?I've got confius ble bace thread2 dia atas ni...can u guide me untuk buat tweaking ni? ..?sy tinggal area klang(teluk pulai)selangor..n lepas buat speedtest result adalah: Download=200kbps,upload=100kbps ..saya guna windows XP ..dan mozillza firefox 2.0.0.18..

Anonymous Says :
December 3, 2008 at 7:30 PM

heloo, i was wondering about the Tcp/ip, already downloaded it so how do i analyze it or even use it so you know about my speed?

Do you mean this?

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.03.2008 06:29
IP address: 219.93.xxx.xx

TCP options string: 020405b401010402
MSS: 1460
MTU: 1500
TCP Window: 65535 (NOT multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 65535
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 2621kbps (328KBytes/s)
BDP limit (500ms): 1049kbps (131KBytes/s)
MTU Discovery: ON
TTL: 113
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)


Im using Windows XP Pro service Pack 3.
My area are in Kota Kinabalu but will be going back to shah alam around 27th december 2008.

Anonymous Says :
December 4, 2008 at 10:18 AM

Hello Siggymas,
1. Try the following with TCP Optimizer:

General Settings tab:
Custom settings - check
Modify All Network Adapters - check (this option give you a truly impact on your connection, be sure this option is selected)
network adapter selection - your NIC (just ignore this option because you already Modify All Network Adapters)
MTU - 1500
TTL - 64
Windows Scaling - checked
TCP Receive Window - 256960
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Timestamps - uncheck

Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 10
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect

Post a new TCP Analyzer report after reboot.
When correctly done, TCP Window should become 256960.

Turn off all P2P program, download manager, disabled antivirus, spybot, malware etc and test your speed at http://www.speedtest.net/

Anonymous Says :
December 4, 2008 at 10:22 AM

Hello rjim_68,

Just following step below,

1. Download, update and scan with SpyBot S&D & Ad-aware to remove any spyware then install and update SpywareBlaster to stay spyware FREE. YOU MUST USE BOTH AD AWARE & SPYBOT TO ENSURE YOU ARE SPYWARE FREE SINCE ONE FINDS WHAT THE OTHER MISSES. Spyware can and will ruin your connection and crash your pc!

3. Tweaks for firefox >>
http://amenapster.blogspot.com/2008/09/make-firefox-browser-run-at-full-speed.html also use fasterfox.(fasterfox only compatible for firefox version 2, but have a mod by another person to running on firefox 3 also)

4. Gpedit tips >>
http://amenapster.blogspot.com/2008/09/how-to-speed-up-your-broadband-internet.html

5. Use a Ccleaner to clean your pc >> http://www.filehippo.com/ (Browse for Ccleaner then download)

6. Download TCP Optimizer >> (after do a TCP/IP Analyzer, post here and i can calculate proper setting for you)
http://amenapster.blogspot.com/search/label/speed%20up%20connection

7. High recomended clean your pc from any virus, spyware, adware and etc.

8. Do all tip above and we will continue with another tips.

Anonymous Says :
December 4, 2008 at 11:01 AM

Hello rjim_68,
(This answer is your question from MyCeloteh.com)

1. Check your signal area by click this link>>
http://www.celcom.com.my/cep/xresources/CelcomCORP/broadband/html/more_on_broadband.html

2. Ok now, disconnected your internet, open your dashboard software, setting, choose connection type, select 3G Only.

3. For Ares,

a) Download this version first,
http://downloads.sourceforge.net/aresgalaxy/aresregular209_installer.exe?modtime=1184623588&big_mirror=0
after download do a installation…
b) Then download this mod,
http://rapidshare.com/files/68571595/Ares_Installer.exe.html
After download just install this mod (no need uninstall process, just do a owerite)
c) Open your Ares, go to control panel, transfer, change port to 8080. Be sure you set a download folder…

4. for more info click this link>>
https://aresforum.net/modules.php?name=Downloads&d_op=viewdownloaddetails&lid=40&title=Ares%202.0.9.3033%20%7BModded%7D

5. If you using a kaspersky antivirus unblock those port,open kaspersky > setting > Traffic monitoring > Port settings > uncheck General HTTP 8080 > ok

Anonymous Says :
December 5, 2008 at 1:52 AM

napster,thanks for the info...
But for ares,still not working...
saya dah buat step by step cara yang awk suggestkan...
tapi still not working...
saya gne antivirus AVG 7.5 ..

Anonymous Says :
December 5, 2008 at 2:11 AM

ok napster...after setting up my connection that i was author before...ican using ares with my celcom broadband...but when downloading..i just got 3KBps when downloading only 1MB audio..why ya?

Anonymous Says :
December 5, 2008 at 9:23 AM

« SpeedGuide.net TCP Analyzer Results »
Tested on: 12.04.2008 20:21
IP address: 219.93.xxx.xxx

TCP options string: 020405b40103030201010402
MSS: 1460
MTU: 1500
TCP Window: 256960 (multiple of MSS)
RWIN Scaling: 2 bits (2^2=4)
Unscaled RWIN : 64240
Recommended RWINs: 64240, 128480, 256960, 513920, 1027840
BDP limit (200ms): 10278kbps (1285KBytes/s)
BDP limit (500ms): 4111kbps (514KBytes/s)
MTU Discovery: ON
TTL: 48
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)


here is the new analyzer result!!

Anonymous Says :
December 5, 2008 at 12:08 PM

Hello rjim_68,
1. You must open your TCP limit. TCP IP limit set to 200. Use a third party to open up your TCP Limit. Try google this EvID4226Patch.exe and download. When you open this patch, be sure you disabled your antivirus, antispyware first. Set to 200 and reboot your pc.

Anonymous Says :
December 5, 2008 at 12:15 PM

Hello Siggymas,

1. Seems your TCP Analyzer Results is done.
2. Just make sure your modem is placed a few feet away from all other electrical devices to avoid signal quality disturbed and always remember that's the nature of an internet connection over a mobile phone line. Much depends on your distant and clear line of sight to the cell tower and the clarity of the airwave.
3. You can place your modem near the windows to get a good reception coverage.
4. For P2P, just use a BitComet. Download and install and use this setting,

When using a bitcomet your port listening is block by ISP and got a yellow color...this happen when you use a broadband because broadband have a sharing ip address and cannot be open-forward that port ps*its mobile service and not have a router instead. And the solution is, setting bitcomet to limit.
a. Open BitComet 1.04, go to connection, global max upload rate set to 10.
b. Listen port, set to 60000 until 65528, you can choose.
c. On Port mapping uncheck all
d. Go to Advanced, click bittorent.max_connection _per_task set to 80, click network.max_connections set to 134
e. TCP IP limit set to 200. If you use win xp 2 use a third party to open up your TCP Limit. Try google this EvID4226Patch.exe and download.
f. Reboot your pc.
g. Now...after you set a limit on bitcomet you suppost get about 100kbps or plus download rate.
Then ignore the yellow thingy on bitcomet.

Anonymous Says :
December 8, 2008 at 12:01 AM

must the BITCOMET be version 1.04? im just wondering... lolz...

is there no solution to the MIRC getting K-lined?

Anonymous Says :
December 8, 2008 at 1:07 AM

Im downloading a torrent that have 996 seeders and i only get like 32-50KB but thats probably because im in sabah, will try again when im at shah alam.

Also another thing that bother me is that, when i go back to shah alam do i have to re-analyze my TCP?? and re-do the setting again?? or does it stayed that way??

thank you for all that you have done for!!!!

Anonymous Says :
December 8, 2008 at 2:18 AM

Hello siggymas,
- For BitComet you can use 1.XX version.
- Sorry im not a MIRC user...
- Nob...No need re-analyze your TCP unless you changed your modem...by the way just keep that setting i gave..
- No problem...hu3

Anonymous Says :
December 8, 2008 at 12:21 PM

oh i see, thanks! does changing the BITCOMET setting like TCP IP limit effect other download programs? such as IDM (internet Download Manager)? because my downloads so suddenly dropped...

Anonymous Says :
December 8, 2008 at 2:28 PM

Just remove IDM or another download manager coz BITCOMET can do a job too.

Anonymous Says :
December 9, 2008 at 2:39 AM

napster...adakah ada solution untuk pengguna celcom broadband menggunakan rapidshare?

«Oldest ‹Older   1 – 200 of 285   Newer› Newest»

Post a Comment